Post your 60ft times and what stall
#21
11 Second Club
iTrader: (7)
Raceweight 3650
Vig3600 E/T streets/no spin 1.72
SS4000 Nitto drl's/pedaled it 1.66
PT4000 Nitto drl's/rolled into it 1.61 All stock internal /N/A motor runs
Vig3600 E/T streets / no spin 1.54 150 shot wet
SS4000 Nittos/spinning 1.62 100 shot wet
PT4000 have not played with this vertor on spray really. Just changed to 3:42 gears with this vertor. Need more than Nittos to really hook it.
Dave
Vig3600 E/T streets/no spin 1.72
SS4000 Nitto drl's/pedaled it 1.66
PT4000 Nitto drl's/rolled into it 1.61 All stock internal /N/A motor runs
Vig3600 E/T streets / no spin 1.54 150 shot wet
SS4000 Nittos/spinning 1.62 100 shot wet
PT4000 have not played with this vertor on spray really. Just changed to 3:42 gears with this vertor. Need more than Nittos to really hook it.
Dave
#30
11 Second Club
iTrader: (2)
Join Date: Dec 2002
Location: Tampa, FL
Posts: 1,068
Likes: 0
Received 0 Likes
on
0 Posts
1.588 with a Yank SS4000......consistant 1.61s.
I have had trouble getting the car's suspension setup so....yeah.....it should have done better. 26" tire with 3.73s
New converter going in, the new Yank SE4400.
I have had trouble getting the car's suspension setup so....yeah.....it should have done better. 26" tire with 3.73s
New converter going in, the new Yank SE4400.
#32
Launching!
iTrader: (49)
Join Date: Feb 2004
Location: Davenport, IA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
1.595 stock suspension with 200k on it even the stock torque arm. 28x10.5 et drags, 3.42 gear and a vigillante 4000 left from idle. I plan on stepping up the gear and droping the tire size.
Last edited by Elec87; 11-28-2005 at 12:45 AM.
#36
11 Second Club
Join Date: Jul 2004
Location: Sydney, Australia
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
1.622 on SS3600 with 3.73 ET Street radials 235/60 x 15 - car did 11.765/115 at 3625lb
1.879 with SS3600 on F1 Eagle GS D3s in 245/40 x 18 - car did 12.445/113 at 3800lb
Consistently under 1.65 with ET street Radials and SS3600
1.879 with SS3600 on F1 Eagle GS D3s in 245/40 x 18 - car did 12.445/113 at 3800lb
Consistently under 1.65 with ET street Radials and SS3600
#40
My car.....(old set up) Yank ST3500 1.58 twice, on a bone stock rear suspension. Mostly mid to low 1.6's.
Girlfriends car.....TCI4400......1.57. Her old verter, Vig. 3200, mostly low 1.7's and a few high 1.6's. She picked up .5 going to the tci.
Girlfriends car.....TCI4400......1.57. Her old verter, Vig. 3200, mostly low 1.7's and a few high 1.6's. She picked up .5 going to the tci.