Tranny won't shift out of 3rd gear
#1
11 Second Club
Thread Starter
iTrader: (7)
Join Date: Sep 2005
Location: Eagle Pass, TX
Posts: 1,930
Likes: 0
Received 0 Likes
on
0 Posts
Tranny won't shift out of 3rd gear
I had my VIG3200 installed about 3 weeks ago at the same time I had my tranny rebuilt. I haven't had a chance to go to the track to really see the launching difference because I just had my rear (10 bolt) rebuilt 2 weeks ago (3rd time ) and I just now finished ''breaking" it in.
The tranny seems to be working fine during normal driving (expect for the "3rd gear" vibration), but when I got on it the other day (WOT) it shift from 1-2 fine, 2-3 fine, but when it was time for the tranny to shift from 3 to 4...well, it didn't it just stayed at 6400 ...I let off the gas and it shifted 3-4. Any ideas on why this would be happening?
The tranny seems to be working fine during normal driving (expect for the "3rd gear" vibration), but when I got on it the other day (WOT) it shift from 1-2 fine, 2-3 fine, but when it was time for the tranny to shift from 3 to 4...well, it didn't it just stayed at 6400 ...I let off the gas and it shifted 3-4. Any ideas on why this would be happening?
Trending Topics
#9
Maybe check you fluid level. Trannies are sensitive to that. My car would hit the limiter on the 2nd to third shifts allot before shiting into third. The fluid was a tad bit low added some it stoped. Hope you get everthing figured out. Take care.
#15
11 Second Club
Thread Starter
iTrader: (7)
Join Date: Sep 2005
Location: Eagle Pass, TX
Posts: 1,930
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cablebandit
because 3-4 clutches are the weak link in a stock 4l60e. you can change that in your tune so it will shift