Tranny cooler input/output
Thread Starter
TECH Fanatic
Joined: May 2004
Posts: 1,030
Likes: 0
From: Wichita KS
Originally Posted by revtime
This is just for informational purposes since most of you can't go to the extreme I did.
I have an Auto Meter pro comp tranny temp guage, sender is mounted in the pan. I have no AC condenser, no fog lights, no bumper support. My B&M hi tek cooler is mounted directly to the radiator and I bypassed the radiator and my front air dam is still there but all the other plastics in front are gone.
I was driving around for over an hour saturday in 95 degree heat and my tranny temps got up to 165.
I thought I was going to have to pull over.......
This is with a 4k stall by the way.....
I have an Auto Meter pro comp tranny temp guage, sender is mounted in the pan. I have no AC condenser, no fog lights, no bumper support. My B&M hi tek cooler is mounted directly to the radiator and I bypassed the radiator and my front air dam is still there but all the other plastics in front are gone.
I was driving around for over an hour saturday in 95 degree heat and my tranny temps got up to 165.
I thought I was going to have to pull over.......
This is with a 4k stall by the way.....
Thread Starter
TECH Fanatic
Joined: May 2004
Posts: 1,030
Likes: 0
From: Wichita KS
Originally Posted by mattsls1
You can come over tomorrow man and look at my setup. My cooler is on teh driver side and gets plenty of air. Just let me know.
