why do big stall cars dyno so low? lets calculate.....
#61
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by jimmyblue
I don't see how you can determine the converter's
efficiency without either a locked baseline pull, or
at least logs of slip RPM and engine RPM (but slip
only tells the minimum and not the actual efficiency
in the midband).
I have a Fuddle that demonstrates 96% (by slip)
at 6000RPM and is still climbing but I shift there.
True, I tasked them specifically for this, and the
big clutch, etc. How spy's piece compares, can't
say. But we are not that far apart on the stall/STR
specs (3400/2.1 vs my 3500/2.0).
efficiency without either a locked baseline pull, or
at least logs of slip RPM and engine RPM (but slip
only tells the minimum and not the actual efficiency
in the midband).
I have a Fuddle that demonstrates 96% (by slip)
at 6000RPM and is still climbing but I shift there.
True, I tasked them specifically for this, and the
big clutch, etc. How spy's piece compares, can't
say. But we are not that far apart on the stall/STR
specs (3400/2.1 vs my 3500/2.0).
I just look at so many graphs on a daily bassis i can see when something doesn't work right.
#62
12 Second Club
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by CollinsAutomotive
I would hope the converter pans out when you start making more power with heads/cam and some other work. But looking at the amount of slip in the graph I'd say that you will most likely need a more efficient converter to get the thing to hustle.