so ive been talkin to a few people and they are saying that a 3800 is to big for my cam. i dont think it is but can i get some input on this one. its not a dd but i dont want anything bigger than that.

 

its fine.

 

Yep, your good.

 

The SS3800 will be an awesome converter. Don't listen to them.

 

To Big? I thought I read nothing under 4000 Stall with that MONSTER CAM

 

3800? ****, I daily drive my 4400 stall with stock internals. You already got the big cam, as far as stall is concerned, go big or go home. 4400 is a piece of cake.

 

Thats a baby verter.

 

4000 or higher would be my choice.

 

SS4000 here and i want more!!!!!!

 

I run a vig 4000 and have heard that they are looser than they are rated and I love it. I started with 2800 and always wished I had gone bigger. Don't hold back!

 

i run a 3800 and will go larger on the next rebuild.

 

4000+

 

3800 Will work great. Unless you plan on spraying nitrous, I would think about going with a 4400 or bigger. Especially if it's not a DD.

 

yeah im going to be spraying a 150 shot... thats why i was thinking maybe i should go smaller but not sure..

 

A SS4000 will handle your 150 shot......

 

that would be as big as i'd go with nitrous. im sure you'll be shifting at around 7 grand which will be fine.

 

3800 will be perfect..

 

yeah im planning on setting my shift point at 6800. i dont want to spin it any higher than that.

 

I run a PT 4200 with my Ms4. I wouldn't go any tighter than 4000.

BTW, mine starts falling off at about 6800 so that should be a great shifting point... that is, if it's comparable to my set up... Ls6 intake, Ms4, 4200 stall, A4, 4.10's, Pacesetters, Twister mufflers straight off the headers.

 

yeah my mods are in my sig except a few so it shouldnt be to different