difficulty level remove/re-install 4l60e?
#22
Removal is finally complete! Now for the expensive part . I've got a feeling that the hardest part is yet to come when I go to re-install the damn thing. Oh well, If I can put up with my wife... I'm sure I have the patience to re-install a trans!
#23
what did the trick on it ryle im still fighting with mine I just sprayed some lube on the studs and I have a little gap at the bottom of the bellhousing and motor but none to get excited about. Congrats on your removal
#24
mine was pretty easy because this trans had just been out about 7 months ago. the hardest part for me was getting the 3 torque converter bolts loose. Just make sure you have all 8 bolts out of the bellhousing and have a jack already under the trans. Pry the trans out with a flat screwdriver and then when out a little use a pry bar. it should come right down