When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You can use any drum that is 98 and later. You do need to make sure that it is a 300MM style. I can get you a drum and swap the shaft for you if you would like. Send us an email or give us a call if you would like to go this route. Vince
It does not have the torque converter clutch seal at the tip of the shaft. The seal will sit just behind the teeth. It will have 30 splines, and measure around .990" OD.