Will I need a tune with a PT4000?
#3
Launching!
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ragtop 99
Sometimes you need to adjust shift points or delete a code. It is not a certainty nor do you need a full tune.
#4
TECH Senior Member
iTrader: (7)
Did you do an idle reset? On a cold motor, pull PCM fuses, let it sit 15 minutes. Restart and allow the car to fully warm -up and relearn the idle. You go between park and gear a few times and that normally does it.
If that doesn't do it, you may need a little more idle air. A 1/2 turn (open) on the idle set screw is normally enough to fix that and not mess up the rest of the tune.
If that doesn't do it, you may need a little more idle air. A 1/2 turn (open) on the idle set screw is normally enough to fix that and not mess up the rest of the tune.
#7
Launching!
Thread Starter
iTrader: (2)
Join Date: Feb 2004
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AutomagicLS1
You might need a tune. Mine did some crazy stuff it wouldput my car into limp mode all kinds of stuff. it is a brutal converter though on the street