Looking for the best tranny cooler to run in a c5 vette
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Daphne,al
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Looking for the best tranny cooler to run in a c5 vette
I am having issues with my previous B & M cooler it is theAutomatic Transmission Cooler
24,000 GVW
14,400 BTU
11'' x 6'' x 1-1/2''
& i am Now signifantly making more with the Na setup 400 rwhp & put a blower on it & jumped it up to 575 rwhp ,so i am now having transtemps fluctulate to say the least.I am now looking @ the 130-70274 Racing Transmission Cooler
29,200 GVW
29,200 BTU
11'' x 11'' x 1-1/2'' i am thinking it will be a tight squeeze anybody using it ?or something equivalent to it ? i appreciate any feed back
24,000 GVW
14,400 BTU
11'' x 6'' x 1-1/2''
& i am Now signifantly making more with the Na setup 400 rwhp & put a blower on it & jumped it up to 575 rwhp ,so i am now having transtemps fluctulate to say the least.I am now looking @ the 130-70274 Racing Transmission Cooler
29,200 GVW
29,200 BTU
11'' x 11'' x 1-1/2'' i am thinking it will be a tight squeeze anybody using it ?or something equivalent to it ? i appreciate any feed back
#3
On The Tree
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Daphne,al
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
the only 3 i see for B & M There considering 3 of there tranny coolers on this page ''Racing Cooler, Racing Transmission Cooler
29,200 GVW
29,200 BTU
11'' x 11'' x 1-1/2''
this is the 1 i have my eye on & i am detirmened to make it fit ,i dont know abbout a fan ,i dont think i will need one with this big *** cooler,i will gain more volume & will need to add @ Least another quart of tranny Fluid ,@ the same time i am wanting to step up & get away from the rubber cooler lines ,the inserted clamps have caused my hose to be eaten & it has left me stranded on more than 2 occasions ,i am wanting to run all earls & stainless steel braided hose from the factory line off the tranny straight to the new cooler & do away with the Nightmares of RUbberHoses & Shitty clamps http://www.jegs.com/webapp/wcs/store...58370_-1_10535 I dont know HiTek tranny cooler this one has a fan on it but dont know if there is room enough for it . ,,it seems i have seen some hotrods run this set up ,Dont know the exact cooler fins this one has ,although it does have a fan & looks pretty compact ,thats what scares me the smaller the cooler, normally the less fins ,the less it cools
29,200 GVW
29,200 BTU
11'' x 11'' x 1-1/2''
this is the 1 i have my eye on & i am detirmened to make it fit ,i dont know abbout a fan ,i dont think i will need one with this big *** cooler,i will gain more volume & will need to add @ Least another quart of tranny Fluid ,@ the same time i am wanting to step up & get away from the rubber cooler lines ,the inserted clamps have caused my hose to be eaten & it has left me stranded on more than 2 occasions ,i am wanting to run all earls & stainless steel braided hose from the factory line off the tranny straight to the new cooler & do away with the Nightmares of RUbberHoses & Shitty clamps http://www.jegs.com/webapp/wcs/store...58370_-1_10535 I dont know HiTek tranny cooler this one has a fan on it but dont know if there is room enough for it . ,,it seems i have seen some hotrods run this set up ,Dont know the exact cooler fins this one has ,although it does have a fan & looks pretty compact ,thats what scares me the smaller the cooler, normally the less fins ,the less it cools
Last edited by vette#3; 02-18-2008 at 08:12 PM.