im going to be getting the level 2 tranny from performance built. with the 2300-2500 stall. my question is do i need to install a tranny cooler? any answers would help thanks guys

 

With that little of a stall.. I would say no.

 

is that stall too small for a stock motor.

 

We we will be sending you one for free with your trans so you may as well install it

 

will that stall work good with a C/H set up?

 

Most all will tell you to get between a 3K to 4K stall... Especially with a H/C car.

If its free, then why not install it.

 

oh dont get me wrong im going to install it. but if i go with a H/C setup which stall would be better the 2300-2500 or should i replace it with a 3600

 

Is this a daily driver?

 

yeah.

 

If its a DD, I would do a 3200. Any bigger will just kill you MPG. I know it does on my 4K stall. But, mine is not a DD though.

Some guys say to go with a 3500, if you do, get some 3:73 and it will help. But, you will lose a little RPM on the highway but it will help with taking off.

 

yeah 3:73 are on my list also. IF i Put 3:73 with the stall im going to get? will it be a good setup or no??

 

Yea, it will be fine. But, I am sure you will want more though.

 

well thanks for all the help man.

 

No problem...

The main thing that contributes to bad gas mileage is keeping your foot off the gas. With a higher stall, it seems that its either WOT or nothing. LOL

Good luck.

 

yeah your right i cant wait to order my tranny. I havent really got on the throttle since my tranny slips at high rpm.