Ok so im converting this M6 i just got to my stage 3 4l60e, what kind of roller coaster am i in for.... how much is this goin to cost me.... what is all needed to complete the job... Thanks guys for your help!!!

 

https://ls1tech.com/forums/automatic-transmission/200477-m6-a4-a4-m6-conversion-info.html

This should help

 

it's not that bad at all as far as the work involved... but there are a lot of little odds and ends you have to get, and can add up.

M6 to A4 you'll need a new wiring harness (or conversion harness from speartech)
flexplate, torque converter, trans cross member, shifter/cable, trans dipstick/tube, trans cooler... you might need a new torque arm bracket depending on whether your auto trans has one or not (they're different from manual to auto).

 

For the money you'll spend on tuning and a harness, it might be worth considering an aftermarket controller ($700-1000).

...I'm in the middle of an M6 to A4 swap and I'm using a Compushift.

The work is pretty straight forward but the cost of small parts involved add up in a hurry.

Beyond that, do a search , there's plenty of info on here.

 

Well i appreciate all of your help guys...


Thanks again