motor transplant questions
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Mar 2006
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
motor transplant questions
can i switch the engine from a 2001 z06 and put it into my 2004 ctsv and put the cadillac engine in the corvette???
besides the bolt on parts on the front would there be any differences?
the z06 engine is built to the hilt and the v engine is bone stock, and i want to keep the v and sell the z06. any thoughts would be great.
besides the bolt on parts on the front would there be any differences?
the z06 engine is built to the hilt and the v engine is bone stock, and i want to keep the v and sell the z06. any thoughts would be great.
#4
TECH Addict
iTrader: (5)
Join Date: Oct 2004
Location: NE Texas
Posts: 2,119
Likes: 0
Received 0 Likes
on
0 Posts
Raven, your from Claremore? I'm a Pryor guy myself. Moved to Texas about a year ago.
Back to the thread, make sure you swap all the pullies, acc, etc. Also, put some good motor mounts in there while you're at it.
Back to the thread, make sure you swap all the pullies, acc, etc. Also, put some good motor mounts in there while you're at it.
#5
TECH Addict
iTrader: (14)
Join Date: Feb 2007
Location: Owasso, OK
Posts: 2,342
Likes: 0
Received 0 Likes
on
0 Posts
Yeah by some UUC mounts. The stock ones are trash.
@jerrad
Yeah I've been in Claremore for 24 years! JUst recently found a girl though so may be moving around. Haven't decided yet.
Thread jack over.
@jerrad
Yeah I've been in Claremore for 24 years! JUst recently found a girl though so may be moving around. Haven't decided yet.
Thread jack over.
Trending Topics
#9
TECH Enthusiast
iTrader: (12)
Other Changes Required
Besides the oil pan/windage tray/pickup tube, you will also have to change the pilot bearing to the CTS-V (or 99-up truck) pilot bearing.
Also, if you use the Corvette clutch/flywheel assembly instead of the V's stock clutch/flywheel, a clutch slave spacer from TPIS or Katech will have to be used to retain the proper clutch pedal operation.
Also, if you use the Corvette clutch/flywheel assembly instead of the V's stock clutch/flywheel, a clutch slave spacer from TPIS or Katech will have to be used to retain the proper clutch pedal operation.