small selection of wheels for our v's? what about all these?
02-26-2009, 11:16 AM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
small selection of wheels for our v's? what about all these? I have been trying to find wheels for m v,came across this website, did a search for our v's and all these came up, will they not work for some reason i am not aware of?
http://www.discountedwheelwarehouse....archModule.cfm
http://www.discountedwheelwarehouse....archModule.cfm
02-26-2009, 11:28 AM
#4
Staging Lane
iTrader: (2)
Join Date: Jul 2006
Location: Waukee, Iowa
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Under 19" nothing comes up other than Asanti, for $4k+ per set... no big deal since expensive wheels have never been difficult to find.
The 18" matches don't seem to show any possibilities that are any larger than our V wheels... i many cases they are more narrow.
I guess I wouldn't see the point in switching if you can't get anything larger in diameter or width... or both.
The 18" matches don't seem to show any possibilities that are any larger than our V wheels... i many cases they are more narrow.
I guess I wouldn't see the point in switching if you can't get anything larger in diameter or width... or both.
Last edited by Higgs; 02-26-2009 at 11:36 AM.
02-26-2009, 11:36 AM
#5
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
I talked to someone from this website and he says the bzo elite wheel will fit for sure. i called bzo to comfirm, and he said the same thing. this doesnt seem right, all of these wheels cant work, everyone says theres a very limited selection for the v's
Trending Topics
02-26-2009, 11:43 AM
#9
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
thats what i thought to!! but i called bzo and they said they drill them to spec. so the distributer can order them custom drilled from bzo at no extracharge. the bzo rep said every wheel they carry they will drill to fit any car. and the drilling is no extra cost. and there not that expensive. less than 2000.00 with tires. from herehttp://www.discountedwheelwarehouse.com/
02-26-2009, 12:17 PM
#10
thats what i thought to!! but i called bzo and they said they drill them to spec. so the distributer can order them custom drilled from bzo at no extracharge. the bzo rep said every wheel they carry they will drill to fit any car. and the drilling is no extra cost. and there not that expensive. less than 2000.00 with tires. from herehttp://www.discountedwheelwarehouse.com/
http://www.d3cadillac.com/vehicles-CTS-0307.php
02-26-2009, 12:17 PM
#11
Well..... Maybe there is a limited supply of good looking wheels for the v that people would actually pay money to put them on their car. Other then the asantis I think ever single wheel in the website would be hideous on a v. Plus I'm sure the quality is horrible. There is a reason her, asanti and ccws are expensive. But u get what u pay for. I really hope u don't put any of those wheels on a v.
02-26-2009, 12:49 PM
#17
TECH Resident
yeah I used to try and look for aftermarket wheels and found some decent options but Dont trust those website's they are wrong and they are trying to sell you SUV rims
CCW is the way to go. I reccomend lowering it first and that will make your wheels look much bigger and there are many powdercoating colors if you want a custom look and it is tons cheaper
Observe Seattle Bums car on the dyno and tell me if they look small
http://www.fquick.com/videos/viewvideo.php?id=5532
here are just some options for powdercoating
and these arent even lowered
or powdercoat the acessory
CCW is the way to go. I reccomend lowering it first and that will make your wheels look much bigger and there are many powdercoating colors if you want a custom look and it is tons cheaper
Observe Seattle Bums car on the dyno and tell me if they look small
http://www.fquick.com/videos/viewvideo.php?id=5532
here are just some options for powdercoating
and these arent even lowered
or powdercoat the acessory
02-26-2009, 01:13 PM
#19
TECH Resident
http://www.ccwheel.com/files/home.php
http://www.trueforgedwheels.com/
02-26-2009, 01:16 PM
#20
Staging Lane
Join Date: Jun 2007
Location: Harker Heights, TX
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
not too many people dislike the stock wheels...but to each his own! BTW, those True Forged wheels are **** hot
Last edited by Lonewolf 1; 02-26-2009 at 01:27 PM.