how much estimated power???
#22
TECH Fanatic
iTrader: (8)
Join Date: Jun 2010
Location: Helendale
Posts: 1,921
Likes: 0
Received 0 Likes
on
0 Posts
K&N, Kooks 1 7/8, Magnaflow - 354hp/370tq Corrected
This was done at the end of August, north of Fort Worth, TX. Temp outside was about 95-98F and Dew Point was in the 67-69F (36-43% RH) outside. Temp and humidity inside was 85.3F and 31%
This was done at the end of August, north of Fort Worth, TX. Temp outside was about 95-98F and Dew Point was in the 67-69F (36-43% RH) outside. Temp and humidity inside was 85.3F and 31%
#25
if you look at Stone17 dyno sheet.. it has STD: 1.03 (so using the STD formula for Correction) the curve you see, including the peak numbers have an ADDED value of 3% to the RAW Uncorrected number.
#27
And what is your point? besides being ignorant about how dynos work and how to interpret their readings. Perhaps its too much for you to understand... sorry I tried.
#28
Eastern Regional Coordinator
iTrader: (1)
Join Date: Feb 2011
Location: Maryland
Posts: 1,491
Likes: 0
Received 0 Likes
on
0 Posts
it was meant more as a joke. Seeing your obvious LACK of a sense of humor, I have NO clue as to what he will dyno. But I actually have a fairly decent background in Dynos and their numbers/correction factors. Why I would NEVER want anything but raw uncorrected data.
Now stop monkeying about and someone post what he is actually going to make at the wheels to within a tenth...
Now stop monkeying about and someone post what he is actually going to make at the wheels to within a tenth...
#30
Eastern Regional Coordinator
iTrader: (1)
Join Date: Feb 2011
Location: Maryland
Posts: 1,491
Likes: 0
Received 0 Likes
on
0 Posts
Ordering a cam(pat G) with dual springs and steel retainers in the next few days. And then god knows when I have a free weekend to install everything. Gonna be enlisting a lot of mech type friends to get it done right and quickly....
God knows who I will get to tune the car... Im hoping to break 410whp...
God knows who I will get to tune the car... Im hoping to break 410whp...
#31
TECH Apprentice
Thread Starter
Join Date: Sep 2010
Location: Southern MD
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
I'm getting the tune up in deleware the owner of the shop has a v and knows wtf he is doing.. a buddy of mine had a 10 second g8 gt tuned by him.. he is on tech as SLOW SEDAN.
RACE PROVEN MOTORSPORTS
130 Hickham rd Unit 28-30
Claymont DE 19703
302 798 4000
RACE PROVEN MOTORSPORTS
130 Hickham rd Unit 28-30
Claymont DE 19703
302 798 4000
#32
Ordering a cam(pat G) with dual springs and steel retainers in the next few days. And then god knows when I have a free weekend to install everything. Gonna be enlisting a lot of mech type friends to get it done right and quickly....
God knows who I will get to tune the car... Im hoping to break 410whp...
God knows who I will get to tune the car... Im hoping to break 410whp...
#33
TECH Senior Member
iTrader: (18)
Thats who does my tuning, and the TUNER has a V not the owner lol. They are great guys and I recommend them to anyone with an LSX. Well worth the ride, i will be heading up ina week or two to get my mustang on the dyno for a full tune, they sent me a base tune for the time being.
#39
TECH Fanatic
iTrader: (8)
Join Date: Jun 2010
Location: Helendale
Posts: 1,921
Likes: 0
Received 0 Likes
on
0 Posts