Speed Inc. 2009 CTS-V 1/4 mile results
09-24-2011, 04:37 PM
#1
FormerVendor
Thread Starter
Speed Inc. 2009 CTS-V 1/4 mile results Last night I ran Tom's CTS-V at GLD. I had a lot of fun and the car feels great 
Mods are-
Metco 9.55” lower
Airaid Induction
WFMP heat exchanger
SW 2” Headers w/3” exhaust
Speed Inc. tune.
I'll have to look back at the dyno results but I think it made around 540rwhp.
Runs were made on 345/35/18 M&H racemasters.
Best-
60ft 1.723
1/8 7.354
1/8mph 97.93
1/4 11.351
1/4mph 126.15
Mods are-
Metco 9.55” lower
Airaid Induction
WFMP heat exchanger
SW 2” Headers w/3” exhaust
Speed Inc. tune.
I'll have to look back at the dyno results but I think it made around 540rwhp.
Runs were made on 345/35/18 M&H racemasters.
Best-
60ft 1.723
1/8 7.354
1/8mph 97.93
1/4 11.351
1/4mph 126.15
09-24-2011, 06:41 PM
#7
TECH Senior Member
Join Date: Nov 2001
Location: Chi-Town, IL
Posts: 11,603
Likes: 0
Received 0 Likes
on
0 Posts
That's moving. I need to get a set of DRs. I wonder how 19" DRs would perform. I'm debating a SW catback, but at 550rwhp with CAI, 2.55 pulley, HE, and tune I dunno if I want to mess with the setup. I'll see what it does come spring.
Trending Topics
, I want to see that! 
09-26-2011, 08:08 AM
#13
11 Second Club
iTrader: (2)
Join Date: Nov 2008
Location: Houston, TX
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
Last night I ran Tom's CTS-V at GLD. I had a lot of fun and the car feels great
Mods are-
Metco 9.55” lower
Airaid Induction
WFMP heat exchanger
SW 2” Headers w/3” exhaust
Speed Inc. tune.
I'll have to look back at the dyno results but I think it made around 540rwhp.
Runs were made on 345/35/18 M&H racemasters.
Best-
60ft 1.723
1/8 7.354
1/8mph 97.93
1/4 11.351
1/4mph 126.15
Mods are-
Metco 9.55” lower
Airaid Induction
WFMP heat exchanger
SW 2” Headers w/3” exhaust
Speed Inc. tune.
I'll have to look back at the dyno results but I think it made around 540rwhp.
Runs were made on 345/35/18 M&H racemasters.
Best-
60ft 1.723
1/8 7.354
1/8mph 97.93
1/4 11.351
1/4mph 126.15
I was at 540 with just the cai and 9.5 (granted I know not all dyno's are the same) the track slip is nice!
09-29-2011, 09:19 AM
#19
Staging Lane
Join Date: Sep 2003
Location: SW Suburbs of Chicago
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Last night I ran Tom's CTS-V at GLD. I had a lot of fun and the car feels great
Mods are-
Metco 9.55” lower
Airaid Induction
WFMP heat exchanger
SW 2” Headers w/3” exhaust
Speed Inc. tune.
I'll have to look back at the dyno results but I think it made around 540rwhp.
Runs were made on 345/35/18 M&H racemasters.
Best-
60ft 1.723
1/8 7.354
1/8mph 97.93
1/4 11.351
1/4mph 126.15
Mods are-
Metco 9.55” lower
Airaid Induction
WFMP heat exchanger
SW 2” Headers w/3” exhaust
Speed Inc. tune.
I'll have to look back at the dyno results but I think it made around 540rwhp.
Runs were made on 345/35/18 M&H racemasters.
Best-
60ft 1.723
1/8 7.354
1/8mph 97.93
1/4 11.351
1/4mph 126.15
Plenty of time to be had on the 60 ft. too. Little more fine tuning and a good launch should net you a 10 second timeslip or damn close.
09-29-2011, 09:27 AM
#20
TECH Apprentice
Join Date: Apr 2005
Location: Chicagoland
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Damn, you're going to make me spend the extra to add the pulley in addition to my kooks and intake you guys are installing for me in October.
Promise I'll make 550rwhp like Tom's?????
Promise I'll make 550rwhp like Tom's?????