Was this your first mod to your V1?
#21
Teching In
Join Date: Jan 2012
Location: North Georgia
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Charcoal activated cabin filter.
Just kidding....
My first was defeating the cags, ordered the CS differential bushing and blob of urethane to go in the void above the differential. Waiting my turn with the rental tool from CS. Ordered new tpms as one of mine reads nothing and two others are intermittent.
It came with a K&N cold air intake.
Just kidding....
My first was defeating the cags, ordered the CS differential bushing and blob of urethane to go in the void above the differential. Waiting my turn with the rental tool from CS. Ordered new tpms as one of mine reads nothing and two others are intermittent.
It came with a K&N cold air intake.
#22
On The Tree
Join Date: Aug 2009
Location: Brandon, MS
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
First mod was a tune and cat back.
Best mod is the anti wheel hop axel. Then a Maggie.
UCC shifter is great. Swaybars are good. Ground controll looks killer! But killed the ride.
You want looks or proformance?
Remo
Best mod is the anti wheel hop axel. Then a Maggie.
UCC shifter is great. Swaybars are good. Ground controll looks killer! But killed the ride.
You want looks or proformance?
Remo
#24
TECH Enthusiast
iTrader: (12)
2. GMPD sway bars and links (< 1 1/2 hours)
3. Ground Control coilover Kit (< 6 hours)
Fixed.
Last edited by scatillac; 04-11-2012 at 06:54 AM. Reason: correction to sequence
#28
Eastern Regional Coordinator
iTrader: (1)
Join Date: Feb 2011
Location: Maryland
Posts: 1,491
Likes: 0
Received 0 Likes
on
0 Posts
mine came with intake exhuast cags. Mine was wheels headers and LS3 vetter FRCs all at about the same time. since then Cam and soon clutch and flywheel... just your average 400hp family sedan.
#30
#31
1. CAGS Eliminator
2. Volant intake
3. Stainless Works longtubes/exhaust w/out cats
4. TBA
Not sure what to get next. Either new motor mounts or Short shifter or antiwheel hop kit n axles
2. Volant intake
3. Stainless Works longtubes/exhaust w/out cats
4. TBA
Not sure what to get next. Either new motor mounts or Short shifter or antiwheel hop kit n axles
#32
1. tint
2. GForce axles
3. CS tranny and motor mounts
4. 9 inch GForce rear, MAP TA's with Tic bushings, BMR toe rods from hell
current project
5. Kooks, Deatschwerks fuel pump,LS3, E-Force TVS2300, HE Street Slayer twin clutch, KB BAP, Meth kit, some 3 inch exhaust that fits 9 inch.
next month
ICHPEN Penske coilovers, and my custom powdercoated true forged rims
then to hopefully finish it off some time in June
Black interior installed (tan on top), EC hood, Satin paint or wrap.
edit: -Hmmmm first mod was throwing away the warranty and swearing never to let a dealer touch my car again
2. GForce axles
3. CS tranny and motor mounts
4. 9 inch GForce rear, MAP TA's with Tic bushings, BMR toe rods from hell
current project
5. Kooks, Deatschwerks fuel pump,LS3, E-Force TVS2300, HE Street Slayer twin clutch, KB BAP, Meth kit, some 3 inch exhaust that fits 9 inch.
next month
ICHPEN Penske coilovers, and my custom powdercoated true forged rims
then to hopefully finish it off some time in June
Black interior installed (tan on top), EC hood, Satin paint or wrap.
edit: -Hmmmm first mod was throwing away the warranty and swearing never to let a dealer touch my car again