Slave Cylinder Question
#1
Slave Cylinder Question
So, I've been searching this forum for quite some time, and now I need help from the experts.....I only hope the experts have some magic to offer me and don't tell me what I'm afraid is coming.
I have an 04 V that I got a few weeks ago. The Clutch has been sticking a little and research on this forum let me to try and bleed the clutch out....so I was working on loosening the bleeder which was tight, but I eventually broke it loose ....and now it is nowhere to be seen. I can reach up and feel a rectangular hole where I believe it used to be....
...now what?!
I have an 04 V that I got a few weeks ago. The Clutch has been sticking a little and research on this forum let me to try and bleed the clutch out....so I was working on loosening the bleeder which was tight, but I eventually broke it loose ....and now it is nowhere to be seen. I can reach up and feel a rectangular hole where I believe it used to be....
...now what?!
Last edited by gabe-v; 08-05-2012 at 05:39 PM. Reason: Removed "EMERGENCY" from title since it's going to be a few days for parts now.
#3
Thanks for the tip....going down to try now. Definitely better than what I feared. I only hope something didn't break. I didn't get a whole turn on it I don't think. We'll find out if I can fish the damn thing out. Definitely did not anticipate this project turning into this big of a deal.
#4
TECH Fanatic
iTrader: (3)
Thanks for the tip....going down to try now. Definitely better than what I feared. I only hope something didn't break. I didn't get a whole turn on it I don't think. We'll find out if I can fish the damn thing out. Definitely did not anticipate this project turning into this big of a deal.
Welcome to MOD HELL.
#6
Looks like the transmission is coming out tomorrow......don't have any idea what else to do. I don't really want to talk about what happened to the magnet. Time to do a bit of searching on best way to do this. If anyone has any handy links ready feel free to forward them....see how fast I can get a remote bleeder while I'm in there and best options for a new slave possibly...looks like the v's going to be down for a few days.
Thanks all for the quick help.
Thanks all for the quick help.
Trending Topics
#8
TECH Enthusiast
Join Date: Jun 2011
Location: New Haven, CT
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
Read Fuzzy Wuzzy's thread a few down "More LS7/any Clutch"
Here is link to ls7 slave if you need it: http://m.oreillyauto.com/mt/www.orei...1352&ppt=C0015
Another great thread:
http://www.cadillacforums.com/forums...h-install.html
Here is link to ls7 slave if you need it: http://m.oreillyauto.com/mt/www.orei...1352&ppt=C0015
Another great thread:
http://www.cadillacforums.com/forums...h-install.html
#9
broke the magnet off....clutch was allegedly replaced along with a rebuilt transmission less than 2k miles ago, so unless it looks totally jacked I'm going to leave it alone. Really would like to tear it apart and get it back together all tomorrow, but realistically probably not going to happen. I already sprayed exhaust bolts with Kroil...now I'm going to go drink ...... a lot ...and then suck it up and start tearing it down tomorrow.
#10
TECH Fanatic
iTrader: (3)
broke the magnet off....clutch was allegedly replaced along with a rebuilt transmission less than 2k miles ago, so unless it looks totally jacked I'm going to leave it alone. Really would like to tear it apart and get it back together all tomorrow, but realistically probably not going to happen. I already sprayed exhaust bolts with Kroil...now I'm going to go drink ...... a lot ...and then suck it up and start tearing it down tomorrow.
That would be the second thing you do besides replacing the clutch.
#13
TECH Enthusiast
iTrader: (8)
You shouldn't have to pull the transmission back too far to get the old bleeder out and see what it looks like, i would think with the trans pulled back 1" you could feel around/probe with a magnet to get it. If you are there I would put a remote bleeder in, but you will need to pull the transmission out further (but that is all going to depend on how quickly you need to put it back together).
#14
Thanks for the extra tips. I think I will just slide the transmission back an inch or so first and see if I can assess the situation.
One stupid question. If I I need a slave, there are a million threads explaining which ones work with the LS7 clutch setup, but will the LS7 slave work with the stock setup?
One stupid question. If I I need a slave, there are a million threads explaining which ones work with the LS7 clutch setup, but will the LS7 slave work with the stock setup?
#16
TECH Enthusiast
Join Date: Jun 2011
Location: New Haven, CT
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
#17
Thanks to all of your help I got it out. Will the ls6 z06 slaves really work? They look different if the pictures are accurate.
I found this http://www.rockauto.com/catalog/moreinfo.php?pk=1135427
but I've never heard of "RHINOPAC"
I found this http://www.rockauto.com/catalog/moreinfo.php?pk=1135427
but I've never heard of "RHINOPAC"
#18
TECH Enthusiast
Join Date: Jun 2011
Location: New Haven, CT
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
The 2007 zo6 ls7 works in the cts-v with an ls7 clutch so I see no reason why a 2004 z06 ls6 wouldn't work.
If you feel uneasy just order one of the ones they list on RockAuto under CTS-V, only downside is they are more expensive.
If you feel uneasy just order one of the ones they list on RockAuto under CTS-V, only downside is they are more expensive.
#19
I contacted this ad on CL. http://killeen.craigslist.org/pts/3145873017.html ... I'd have to have it shipped which is a bit of a gamble. Now I'm waiting for a reply if not I'll just order my new stock slave and go on.