carbon fiber ashtry switch panels
09-07-2008, 06:34 PM
#1
Launching!
Thread Starter
Join Date: Apr 2006
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
carbon fiber ashtry switch panels i got bored again. and finished up the prototypes. these are a little rough plus the paint pens marks :o . i need to see how many of you guys might want just the blanks before i get raped on another sheet of carbon 
as far as price $35 for both, $25 on the left side. if i can get 10 or so onboard that will go down
as far as price $35 for both, $25 on the left side. if i can get 10 or so onboard that will go down
Trending Topics
09-08-2008, 04:08 PM
#9
Launching!
Thread Starter
Join Date: Apr 2006
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Here ya go for the doit your selfer's!!! Now you can make more peices CF
http://volvospeed.com/Mods/carbon_fiber_sheets.html
http://volvospeed.com/Mods/carbon_fiber_sheets.html
you can sneak in a 2 1/16 gauge . i can look into stealing a gauge for mockup since you can really only put it in one spot. the reason i dropped this idea the first times was i didnt want $1,000 stock of n2o gauges laying around
the best way on the switchs is a drill. also you can cut this stuff with a knife if you really had to.
