Looking for an oil pan and pick up tube.

Let me know if you have one that's available, thanks.

 

offering price?

 

You still have your stock stuff? I not looking to go more than 125 shipped if I don't have too.

this isn't a need it's just going to make my new engine build easier.

 

Cant go that low, lowest i can do is 250 shipped

 

Naf,

thanks for the offer, but at that price I am into new parts territory. Not that i dont trust your parts but I would rather have new for a few $$ more.

 

Naf is a tool.

http://www.ebay.com/itm/Genuine-Cadi...VWyPKF&vxp=mtr

182 for the pan

you can get the pickup for 60. i know it's not in your range, but that's less than what he wants. ****.

 

He also wants the pickup tube.

 

Yes I know. You can get it for 60 if you dig around.

You want more than new.

Not our fault you live in sand land

 

So 240...for a part that doesnt wear...

Plus you have to modify the lsa oil pans. Mine is plug and play...

 

Well you are both right. The lsa pan is cheaper by far than the stock pan, and it does require mods. But I have a good stock one, I was just looking to be able to seal up the new motor while still driving the car with the old motor.

it's not worth 200+ for me to do that when it will only take a few hours during the install to swap the pan pickup and windage over.

thanks for the offer, I'll let you now if I change my mind. I'll keep my eye open for a cheaper one for now.

 

Does that eBay one come with everything except the pickup tube?

 

I believe there are two major differences. One I know for sure, the bosses for the old cooler on the lsa need to be removed to clear the cradle or at least clearanced.

also the has been some talk about the old filter bypass being different, as in not on the V1 pan because it is internal to the filter. This I am not as confident on.