turboescalade

iTrader: (10)

so i'm lookin for a quick reply to this but am doubting it.. i'm wondering if any of you fellow canadians know of anyone in the region that make injector adapters.. i'm in need to change over from my style which is i think EV6.. i have an 02 escalade with the 6 litre. and have a set of seimens which are an EV1.. lemme know

turboescalade

iTrader: (10)

no one at all???

91ZLS6

iTrader: (2)

Racetronix is located in Scarborough, Ontario

Racetronix

iTrader: (2)

In most cases GM SUVs in those years used Multec II injector connectors:


You may require Minitimer connectors as shown here:
http://www.racetronix.biz/itemdesc.asp?ic=ICA8&eq=&Tp=

turboescalade

iTrader: (10)

those top ones are what i have on my truck, and i am going to some seimens 60 pounders and i think they are the ev1 style, correct? if so do i just get the harnesses like what is shown above and cut the other ones out and solder the new ones to the existing wires? does that mess with how many ohms or anything the wire puts to the injectors?

Racetronix

iTrader: (2)

Right, you need to change the connectors. The Siemens 63's come in Minitimer and USCAR versions which are both listed in our web store.

We have the Minitimer and USCAR connectors as well.
The connectors come with heat shrink and solder.

turboescalade

iTrader: (10)

they are the minitimer style, would i be able to order 8 from you

Racetronix

iTrader: (2)

Yes, right here:

http://www.racetronix.biz/itemdesc.asp?ic=ICA8&eq=&Tp=