Project 69 Camaro "Darkness"
11-27-2008, 06:29 PM
#42
Teching In
Thread Starter
Join Date: Oct 2008
Location: Kitchener Ont Canada
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
We have a few other projects on the go along with this one:
A Maverick full tube chassis drag car. Chassis is back from paint, now we need to finish the tin work and mount the body on the chassis.
A 1970 Camaro Pro Mod drag car, this is a long term project. We work on it when we can.
Garth made this differential from scratch. 3" axel tubes 1/4" thick
A Mid 80's Mustang is coming in very soon for a back half and cage made of chromoly, legal for 7sec passes.
Other small jobs come in once in a while not car related that need to be taken care of in between too.
Oh and thats just the fabrication side of the business....we also rebuild Rotary engines and service most Mazda's as well.
A Maverick full tube chassis drag car. Chassis is back from paint, now we need to finish the tin work and mount the body on the chassis.
A 1970 Camaro Pro Mod drag car, this is a long term project. We work on it when we can.
Garth made this differential from scratch. 3" axel tubes 1/4" thick
A Mid 80's Mustang is coming in very soon for a back half and cage made of chromoly, legal for 7sec passes.
Other small jobs come in once in a while not car related that need to be taken care of in between too.
Oh and thats just the fabrication side of the business....we also rebuild Rotary engines and service most Mazda's as well.
11-28-2008, 02:52 PM
#44
Teching In
Thread Starter
Join Date: Oct 2008
Location: Kitchener Ont Canada
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Definatly! Mississauga isn't that far from us. 1/2 hour on the 401.
Battery box located in the "trunk"
The wheel tubs are HUGE
Starting to figure out the 3 link suspention
Not too much suspention travel for this car!
Heres a couple of the exhaust
Battery box located in the "trunk"
The wheel tubs are HUGE
Starting to figure out the 3 link suspention
Not too much suspention travel for this car!
Heres a couple of the exhaust
12-23-2008, 10:06 AM
#49
Teching In
Thread Starter
Join Date: Oct 2008
Location: Kitchener Ont Canada
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Yeah its been a little while, heres a few more small details that have been accomplished.
Rear quarters are fitted and tack welded in place.
Hinge and gas strut for the trunk lid (sorry about the blurry pics)
Support for the rear panel welded in
3 link figured out and adjustable panhard bar in place
Some rear sheet metal and wheel tubs
Front brakes on the left, the rear's on the right. The rear brakes are actually front C6 Vette caliper/rotors. And the massive fronts are Z06 Vette brakes.
Rear quarters are fitted and tack welded in place.
Hinge and gas strut for the trunk lid (sorry about the blurry pics)
Support for the rear panel welded in
3 link figured out and adjustable panhard bar in place
Some rear sheet metal and wheel tubs
Front brakes on the left, the rear's on the right. The rear brakes are actually front C6 Vette caliper/rotors. And the massive fronts are Z06 Vette brakes.
