Carbureted LSX Forum Carburetors | Carbed Intakes | Carb Tuning Tips for LSX Enthusiasts

Carbed lm7 swap

Thread Tools
 
Search this Thread
 
Old 11-29-2010, 01:03 AM
  #1  
Teching In
Thread Starter
 
Jayhill's Avatar
 
Join Date: Sep 2010
Location: Cleveland, ms
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Exclamation Carbed lm7 swap

I am looking for a guide or instructions for a 5.3l engine. I decided to go carb instead of fi because ecm was not purchased with engine. I have the dual plane victor jr with msd. Going back with the 4l60e that came with engine. I read where you can get a remote throttle control. Similar to a kickdown on a 700r. This is my first engine swap any info on this setup is very appreciative. The engine is going in a 84 caprice coupe.
Old 12-02-2010, 04:30 AM
  #2  
TECH Junkie
iTrader: (18)
 
LS1MCSS's Avatar
 
Join Date: Jan 2006
Location: Dover, Arkansas
Posts: 3,831
Likes: 0
Received 7 Likes on 7 Posts

Default

If you use the 4L60E, with a carb, you need a transmission controller and they aren't cheap. As for the intake, you can't have a Victor Jr, dual plane. If it's a dual plane, then it's an Edelbrock Performer. The Victor Jr is a single plane intake.



Quick Reply: Carbed lm7 swap



All times are GMT -5. The time now is 11:31 PM.