gregsss

Nice work man, ur progress looks good man

dmracing

iTrader: (78)

A little update. Wait on f-body radiator, water pump, and fans. Almost there

dmracing

iTrader: (78)

A few more updates. Installed the radiator and hoses waiting on the fan assembly.

The stunningman

iTrader: (47)

I predict you will be very happy with the combo. Looks great man. I've had that cam before on a LQ9 , L92 headed 6.0 and it pulled great and even got decent mileage. I see a extra regulator. Hmmm! what could that be for? Also good luck with fitting it under the 2" cowl with a decent filter assembly.

R. Finkle

Is that just a stock f body rad and fan setup? I have a 79 fairmont and am wondering about the brp trans crossmember fitment....

dmracing

iTrader: (78)

Yes, just F-body set up. I dont have the BRP trans crossmember, They dont have one for the Turbo 400.

dmracing

iTrader: (78)

Here are a few more shots. Waiting to get time to tap block for alt bracket and wire fans.

jaywill

iTrader: (5)

Super nice ! How did u wire it up ? Starting ,timming, coil packs, ec....

dmracing

iTrader: (78)

I used the Ford starter soleniod and jumped the one on the starter. Timing is controlled with the MSD 6012, and coil packs just plug in the the MSD harness. Very easy

jaywill

iTrader: (5)

Thanks a lot !!!

booboo37

iTrader: (43)

What trans cross memeber ?? Did you use a stall converter with a long snout ?? and what flaxplate ?

dmracing

iTrader: (78)

Had a crossmember made. Normal Chevy convertor with TCI flexplate

jaywill

iTrader: (5)

dmracing is brp still open i can' get anyone but answering machine..leave message and nothing

dmracing

iTrader: (78)

I believe so. I had a hard time a couple of times getting a hold of them.

jaywill

iTrader: (5)

ok thanks

The stunningman

iTrader: (47)

Bringing this up to see about progress. Looking back at the valve cover pictures I'm wondering where you found those blue gaskets at? Any info on them?

jaywill

iTrader: (5)

thanks ! I got a hold of them ..$280.00+$10.00 shipping..

dmracing

iTrader: (78)

I ordered them from rockauto. Felpro. Ill have to check the number

dmracing

iTrader: (78)

Are you using them?

dmracing

iTrader: (78)

I tried to start it the other day and it would not stay running. Didnt notice it at the time but the idle mixture screws were almost all the way in. Just waiting to get some free time.