JEGS lifters......?

pairof69s · 2013-10-17 20:31:27

Just noticed jegs has some ls lifters out, (http://www.jegs.com/webapp/wcs/stores/servlet/m20ProductDisplayView?pageSize=10&resultCatEntryType=2&searchTerm=&catalogId=10002&langId=-1&productId=2800348&storeId=10001&sType=&pgGrp=search) Wonder about the extended body length,? Would that allow to run stock length push rods......? http://www.jegs.com/i/JEGS-Performance-Products/555/20830/10002/-1?parentProductId=2442582

Reply Subscribe

Thread Tools

Search this Thread

Oct 17, 2013 | 03:31 PM

pairof69s

Thread Starter

Launching!

Joined: Apr 2011

Posts: 248

Likes: 0

JEGS lifters......?

Just noticed jegs has some ls lifters out,

Wonder about the extended body length,? Would that allow to run stock length push rods......?

http://www.jegs.com/i/JEGS-Performan...ductId=2442582

Last edited by pairof69s; Oct 23, 2013 at 03:02 PM.

Oct 17, 2013 | 04:38 PM

ZONES89RS

In-Zane Moderator

iTrader: (25)

Joined: Jan 2007

Posts: 11,941

Likes: 33

From: Conroe, Texas

Link to said part? LS lifters are the same as GM has been using since 1987 in the roller 305, 350.

Oct 17, 2013 | 05:31 PM

snook

TECH Apprentice

iTrader: (1)

Joined: Apr 2007

Posts: 320

Likes: 1

I used these, but still measured my pushrod length to be sure. Always measure, ended up using a longer pushrod

http://www.jegs.com/i/Chevrolet+Perf...99225/10002/-1

Oct 17, 2013 | 06:15 PM

pairof69s

Thread Starter

Launching!

Joined: Apr 2011

Posts: 248

Likes: 0

Using my phone so its a bitch to copy and paste, cant get the link up but heres the part# JEGS Performance Products#555-20830

Oct 23, 2013 | 03:04 PM

pairof69s

Thread Starter

Launching!

Joined: Apr 2011

Posts: 248

Likes: 0

anybody have an opinion on these lifters?http://www.jegs.com/i/JEGS-Performan...ductId=2442582.......

Oct 23, 2013 | 10:20 PM

The stunningman

9 Second Club

iTrader: (47)

Joined: Aug 2006

Posts: 761

Likes: 1

I would use regular GM LS7 lifters. Could be made in china.... Could be made by the same company that sold these 5/16 7.4 pushrods.

Attached Thumbnails

Oct 30, 2020 | 01:25 AM

James Martin

Teching In

Joined: Feb 2019

Posts: 20

Likes: 0

From: Fort Worth , Texas

Pr length

Quote:

Originally Posted by snook

I used these, but still measured my pushrod length to be sure. Always measure, ended up using a longer pushrod

http://www.jegs.com/i/Chevrolet+Perf...99225/10002/-1

what length did you end up using?

JEGS lifters......?

JEGS lifters......?

Trending Topics