Neanderthal Carb Guy BS Thread
08-08-2016, 09:03 PM
#1061
Lol, two rolling chassis to make one chassis run.......? Your math sucks ***. Lol
On a side note, my mother Fkn 3/4 ton lost oil pressure today and started rattling. Get to pull that apart. See what the Fkn deal is. Guess the base model melling pimp was **** or there was too much clearance in the bearings. I'll see what the short block builder says. Total bullshit to deal with after my wife's truck was stolen.
I'll just be glad I can take the bastard apart and roll it forward and work on the next project while the machine shop does its thing or I find a replacement engine. Wonder how my hotcam would do in a LY6.....
On a side note, my mother Fkn 3/4 ton lost oil pressure today and started rattling. Get to pull that apart. See what the Fkn deal is. Guess the base model melling pimp was **** or there was too much clearance in the bearings. I'll see what the short block builder says. Total bullshit to deal with after my wife's truck was stolen.
I'll just be glad I can take the bastard apart and roll it forward and work on the next project while the machine shop does its thing or I find a replacement engine. Wonder how my hotcam would do in a LY6.....
08-09-2016, 08:41 AM
#1062
Man, if it wasnt for bad luck you would have none at all. Hit up craigslist and buy the motor from your wife's escelase.
Any sightings of that truck? Check toll tag records if you havent already. It might tell you which direction it left town. Where was it taken from? Surely nobody had the ***** to take it from your long driveway.
Any sightings of that truck? Check toll tag records if you havent already. It might tell you which direction it left town. Where was it taken from? Surely nobody had the ***** to take it from your long driveway.
08-28-2016, 07:06 PM
#1066
my progress has slowed to a snails pace, even when i don't have any other plans. i get started late and end early. i did get the front end mostly together on this car, but found out the steering shaft setup isn't going to work with the huge tube headers, so a quick message to PA Racing has me something on the way that should work.
but no matter what i do, this car fights me. here's a strut-to-spindle bolt that got a piece of trash on the threads and stripped out. thankfully i was going to the salvage yard today anyway and was able to get 2 new ones. these are shouldered, metric, class 10.9, fine-threaded bolts, so finding something that would be exactly right at the hardware store would be impossible.
and stickers make everything faster, right?
speaking of stickers, i end up with a lot of stickers that i don't necessarily want littered all over the car, but they're cool none-the-less. well i have this cabinet and it just so happens to have needed some decoration. love it! hoping to get some more cool stickers soon
lastly, i needed a stand for my bench grinder, so i made this up. yes it's cam only.
next weekend is a 2 day race, so i doubt i'll get much done around here otherwise, lol!
but no matter what i do, this car fights me. here's a strut-to-spindle bolt that got a piece of trash on the threads and stripped out. thankfully i was going to the salvage yard today anyway and was able to get 2 new ones. these are shouldered, metric, class 10.9, fine-threaded bolts, so finding something that would be exactly right at the hardware store would be impossible.
and stickers make everything faster, right?
speaking of stickers, i end up with a lot of stickers that i don't necessarily want littered all over the car, but they're cool none-the-less. well i have this cabinet and it just so happens to have needed some decoration. love it! hoping to get some more cool stickers soon
lastly, i needed a stand for my bench grinder, so i made this up. yes it's cam only.
next weekend is a 2 day race, so i doubt i'll get much done around here otherwise, lol!
08-29-2016, 09:13 AM
#1067
Sorry Matt, I'll have to shamelessly steal your bench grinder design I think.
A friend of mine down here has a mullet militia sticker on his lift. Wonder how it got out here to Texas?
I'll have my first two post lift installed Thursday and I am scrambling to finish the eclectical by then.
A friend of mine down here has a mullet militia sticker on his lift. Wonder how it got out here to Texas?
I'll have my first two post lift installed Thursday and I am scrambling to finish the eclectical by then.
we have members everywhere. who is your friend?
09-01-2016, 11:17 PM
#1070
Totally a great feeling of accomplishment today. Not only did I bust *** in time to get the electrical to the shop, I got all the lights mounted and wired as well as had my lift installed today. Couldn't be much happier. There are 5 lights total. They are a dual 46" T5 HO. I was worried about the coverage but waited till dark and was not disappointed what so ever.
Lift:
Lighting:
Lift:
Lighting:
I guess everything IS bigger in TX ? including sheds 
09-02-2016, 06:07 PM
#1079
i'm waiting on those money bags you speak of. my house is paid off in about 5 years. i want to have 100% equity in this one so i can roll it into the next house....or rent this house out and use that money to pay a nice chunk of the monthly on the next crib.