Motor falls dead in gear
02-26-2019, 09:11 AM
#1
Teching In
Thread Starter
Join Date: Apr 2017
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Motor falls dead in gear Motor runs fine at idle. But when I put it in drive and give it gas it shuts off. Any suggestions pls??
6.0 carbureted
408ci
victor jr
.610 lift 245/260
750 quick fuel
Forged pistons
forged crank
6.0 carbureted
408ci
victor jr
.610 lift 245/260
750 quick fuel
Forged pistons
forged crank
02-26-2019, 10:25 AM
#2
TECH Senior Member
Fuel restriction? (clogged filter?)
02-27-2019, 04:33 AM
#5
10 Second Club
With no load on motor (idle) you can add more timing.
Mine is 30 at 0 RPM and 35 at 600 flat lined to infinity with a 7500 rev limit.
Try adding some timing below 1000 and see if its better ?
Mine is 30 at 0 RPM and 35 at 600 flat lined to infinity with a 7500 rev limit.
Try adding some timing below 1000 and see if its better ?