How are people attaching a map sensor to the msd 6014 box? Reading the directions online I can’t find anything explaining how to do it. Pictures would be great too
thanks John

 

There is a silver fitting on the ignition box. 1/4 inch nylon air brake tube will push into the fitting. Connect the other end of the tubing to the intake. You can b the tube and a push lock fitting for the manifold end from Napa. The tubing comes in several colors.

 

Thanks Mark

 

what is the advantage of this?

 

The advantage is you don’t need an external map sensor and it acts like a vacuum advance on an old distributor