2001 Camaro V6 Build thread
#47
Got my new headlight on. The HID is more blue is the picture but I'll try them out and see how I like it. If I don't like it I'll probably order the good high end/ good ballast and bulbs and not the Ebay special lol. I still need to properly aim them but I'll do that when I actually plan on driving the car.
#48
UPDATE:
Got my new hood. It's def going to get a paint job sometime. Also where is a good place to get the mesh thing that goes in the scoop part?
More Pics
Now how can I get a new grille to fit it? I don't have any tabs or anything to secure it??
Got my new hood. It's def going to get a paint job sometime. Also where is a good place to get the mesh thing that goes in the scoop part?
More Pics
Now how can I get a new grille to fit it? I don't have any tabs or anything to secure it??
#49
Just a little update. Sometime in the future I plan on buying a used ARH Cam for only the cost of shipping. Yes.... the cost of shipping. It had the keyway damaged on it and was professionally repaired and been fine for 3+ years. Only thing I'd need to replace are the springs to the 90# LS6 springs, retainers, rocker arm bolts and gaskets of course. This will probably be a winter project. I don't want to tear it down during the summer if I don't have to. One of the previous owners went a 13.7 with just the cam and a 3200 stall. Since I won't be putting a stall in it, I think it would run low 14s. What a big difference from low 15s lol. Here are some specs on the cam
ARH Naturally Aspirated cam
-210/220 @ .050
-.320" lobe lift on the intake, .512 with a 1.6 rocker ratio
-.320 lobe lift on the exhaust, .512 with a 1.6 rocker ratio
-112 lobe separation
ARH Naturally Aspirated cam
-210/220 @ .050
-.320" lobe lift on the intake, .512 with a 1.6 rocker ratio
-.320 lobe lift on the exhaust, .512 with a 1.6 rocker ratio
-112 lobe separation
#59
I've been thinking about taking my silver hockey stripe off and doing something different. Maybe one of these stripes in the checkered style in black. Thoughts?
http://fourthcircledesigns.com/produ...products_id=39
http://fourthcircledesigns.com/produ...products_id=39