5.3 luv truck..
#1
5.3 luv truck..
thought i started a project thread a while ago on my luv truck.
had a luv truck when i was 16, sold it, and wanted one ever since.. got one a while back ago.. modded the stock frame alot, then decided i wanted it bagged, stock floored etc so i started over.. not gonna post all my pics cause itd take ******* forever.. but heres a semi kinda not really quick over view
bough this one for 250$..
z'd 2", widened frame under cab, narrowed rear frame
found a good deal on a truck in alot better shape.. 1200$ shipped..
kept the 2wd frame, and 4wd body, and started over..
mustang II suspension, narrowed 3"
plans for now motor wise, go through the 5.3, i have a ls6 cam and intake for it.. run that, build a set of headers, get a stall, and run it as is then start building a 6.0 or something down the road..
had a luv truck when i was 16, sold it, and wanted one ever since.. got one a while back ago.. modded the stock frame alot, then decided i wanted it bagged, stock floored etc so i started over.. not gonna post all my pics cause itd take ******* forever.. but heres a semi kinda not really quick over view
bough this one for 250$..
z'd 2", widened frame under cab, narrowed rear frame
found a good deal on a truck in alot better shape.. 1200$ shipped..
kept the 2wd frame, and 4wd body, and started over..
mustang II suspension, narrowed 3"
plans for now motor wise, go through the 5.3, i have a ls6 cam and intake for it.. run that, build a set of headers, get a stall, and run it as is then start building a 6.0 or something down the road..
The following users liked this post:
DualQuadDave (01-19-2024)
#2
LS1Tech Sponsor
iTrader: (5)
NICE!! I always luved those trucks. By the way, the fact that you are doing all that fab work in a two car garage is extremely cool. i like the tubing bender cart.
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
#7
pace setter headers for 01ish camaro.. cant use them with new frame, will have to build a set of headers.. nbs shorts come close to working, i could modify one tube and they will, but im wanting long tubes.
will 1-3/4" headers with 2.5" exhaust and x pipe be enough for a 5.3? what about a 6.0 with aftermarket heads, cam etc?
Trending Topics
#9
TECH Fanatic
iTrader: (23)
A buddy of mine built a luv truck with a cammed 6.0 in it. We built the headers for it at our shop with 2 inch primaries longtube headers. Sounds mean as hell. Ran really good till he spun a bearing. Now he is putting my old 5.7 out of my 02 z28 in it. Your build looks badass
#10
A buddy of mine built a luv truck with a cammed 6.0 in it. We built the headers for it at our shop with 2 inch primaries longtube headers. Sounds mean as hell. Ran really good till he spun a bearing. Now he is putting my old 5.7 out of my 02 z28 in it. Your build looks badass
was it carb'd? if so, im pretty sure hes on luvtruck.com.. thats the only other ls luv truck ive seen.
#12
some updates... i forget i have a thread here
overflow my dad made, mounted
tranny tunnel done
rust fixed
and i decided to find a running 6.0 or 6.2 and drop in it for now. then later on do some work to that instead of messing with the 5.3
overflow my dad made, mounted
tranny tunnel done
rust fixed
and i decided to find a running 6.0 or 6.2 and drop in it for now. then later on do some work to that instead of messing with the 5.3
The following users liked this post:
DualQuadDave (01-19-2024)
#14
sweet! i had a 76 for my first truck.. tpi 305,700r4. it was a fun *** truck. wish i didnt ever get rid of it.. but now i this one which will be cooler.
steering column, wheel and adapter kit ordered. got a 35" ididit column, non tilt, steel. ill have to shorten column but its the only one they had in stock. and i didnt need tilt in my old luv truck so why in this one. and i got the cheapest grant wheel i could.. 25$. will do till i get a billet one.
i called up a guy about building me a set a headers. i will be giving him a deposit on them, and probably dropping the truck off as within the next month. and he should be getting to it by febuary and will take a couple weeks. hes a one man operation so its not super fast. but i hear he is awesome.
steering column, wheel and adapter kit ordered. got a 35" ididit column, non tilt, steel. ill have to shorten column but its the only one they had in stock. and i didnt need tilt in my old luv truck so why in this one. and i got the cheapest grant wheel i could.. 25$. will do till i get a billet one.
i called up a guy about building me a set a headers. i will be giving him a deposit on them, and probably dropping the truck off as within the next month. and he should be getting to it by febuary and will take a couple weeks. hes a one man operation so its not super fast. but i hear he is awesome.
#16
yes, Real cool.!!
#19
Launching!
iTrader: (10)
Join Date: Oct 2008
Location: Winnipeg Manitoba Canada
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Very cool build. Thumbs up for old school truck/ Out of curiousity, what's a set of custom built headers worth?If you don't want to post the price, could you pm me it? Maybe another guy or 2 on the forumn thinking about doing this swap might need a set made for them selves.