What's a fair price for an LS1 pullout
#1
Teching In
Thread Starter
Join Date: Apr 2010
Location: San Antonio, TX
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
What's a fair price for an LS1 pullout
Hi,
I'm doing research for a future project, and I was wondering what a fair price is for an LS1 pullout that comes with everything needed to make it run. For the sake of argument lets say the swap has 60,000 miles on it.
My plan is to swap the engine into a Jaguar. I was looking into using a 5.3 LSx engine, but to make it work I'll have to use LS1 intake, accessory drive, and oil pan. By the time I do all that I might as well go LS1. On the other hand a 5.3 engine is much cheaper so maybe it's worth it...
Anyway, I'd like to hear what you think about this.
Thanks,
Darian
I'm doing research for a future project, and I was wondering what a fair price is for an LS1 pullout that comes with everything needed to make it run. For the sake of argument lets say the swap has 60,000 miles on it.
My plan is to swap the engine into a Jaguar. I was looking into using a 5.3 LSx engine, but to make it work I'll have to use LS1 intake, accessory drive, and oil pan. By the time I do all that I might as well go LS1. On the other hand a 5.3 engine is much cheaper so maybe it's worth it...
Anyway, I'd like to hear what you think about this.
Thanks,
Darian
#2
On The Tree
iTrader: (13)
Join Date: Mar 2010
Location: North Augusta, Sc
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
may not help much but you can also get a 6.0 pretty cheap & they can make alot of power...@ a local junkyard they had a pullout 6.0 lq4 for 800 bucks...but I ended up buying an ls1 for 3 grand with everything, accessories, transmission, wiring & ecu
#6
TECH Addict
iTrader: (22)
I used a 5.3 in my 3rd gen which requires the LSx engine to be setup in 4th gen dress. So I needed all the accessories, intake, pan, exhaust etc
When it was all said and done my $200 5.3L cost $1600 to get ready to drop in, but it took me 9 months to deal hunt all the necessary parts and not break the bank
If you can source a complete engine for $2000 or less, or engine/trans combo for $2500 or less, then its a good deal
When it was all said and done my $200 5.3L cost $1600 to get ready to drop in, but it took me 9 months to deal hunt all the necessary parts and not break the bank
If you can source a complete engine for $2000 or less, or engine/trans combo for $2500 or less, then its a good deal
#7
TECH Addict
iTrader: (28)
My 99 ls1 t56 with everything complete was like $3400. Ls1's run quite a bit more than 5.3's or 6.0's and the 6 speed setups are much more than auto's. You can get a ls1 with an auto in the $2500 to $2800 range. A 5.3 with and auto I have seen for $1500 or so. It just depends what you want. Hope this helps, Josh
Trending Topics
#8
im trying to sell a 6.0 here in Craigslist in shreveport louisiana with everything from the fan to the yoke in the 4l80e all wires all accs fuse box even stubs out of the fuse box,x member and all.needs a rad fuel pump and driveshaft..cpl nibbles im asking 1800 and its still here after a week
#10
Teching In
Thread Starter
Join Date: Apr 2010
Location: San Antonio, TX
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Are you using a GenI engine?
Thanks to everyone who replied.
Darian
#13
I paid $3,600 for a complete '00 LS1with the 4L60e, Howell harness and ECU with a purported 15,000 miles. Also had some S&P parts (and a custom engine cover kit) with it since it was in a Bel Air before.
#14
This place is a very popular source for motors around here. I find their web site a very good source for pull out prices. they have an 02 LS1 motor and T56 with ony 4K miles for $3500. Seems like a good deal to me.
http://stores.ebay.com/Fparts_Engine...34Q2ec0Q2em322
http://stores.ebay.com/Fparts_Engine...34Q2ec0Q2em322
#15
TECH Fanatic
iTrader: (7)
Join Date: May 2003
Location: Valley Center KS
Posts: 1,602
Likes: 0
Received 0 Likes
on
0 Posts
I have ~$1500 into my 5.3L/4L60E with corvette accessories and F-body oil pan. Right now I am still running the truck intake, but I have an LS6 intake setting on the shelf. I just need to get the LS1 fuel rails and different injector plugins and I'll be able to run it, but its low on the priority list.