LSLucas

The breather tube hose for the heads on my engine ran to the throttle body. My question is since I'm putting a regular intake with a throttle body elbow and a throttle body, how will I need to run my vent tube?
This is the tube like me

This is what I'm gonna do

nofun

Those are your steam port tube, you will need to keep them. You can run a hose back
to the radiator

tfi racing

iTrader: (2)

Many possible solutions,some drill and tap the water pump,others put a tee in the upper rad hose,here's mine.

bczee

iTrader: (12)

I bypassed the connections on the Throttle Body and run it directly to the Radiator.

You can also simplify the setup and use the LS6/LS2 setup, which just uses block on the back two and just has the front joined and connected to the radiator/water pump/hose.

BC