LS Ford Focus
#1
LS Ford Focus
I have a small block chevy ford focus I built a year ago. Instead of building the small block I decided to go ls.
I am using a 5.3 trailblazer aluminum motor
Holley intake
Painless wiring harness
Lingenfelter gt1-1 cam
Garrett GTX42 turbo
I am using a 5.3 trailblazer aluminum motor
Holley intake
Painless wiring harness
Lingenfelter gt1-1 cam
Garrett GTX42 turbo
Last edited by topspeed1; 04-24-2017 at 08:56 PM.
#13
TECH Junkie
iTrader: (1)
Seems something's a miss with those scale readings -- Seems like the 7xx-8xx readings should be the front and the 5xx readings the rear -- but that doesn't match up with the markings on the readout face. Perhaps the scales were plugged into the wrong connectors? Getting rid of some weight up front would be nice. If the current lump has cast iron heads - you could be looking at dropping at least 125 lbs. off the front -- good stuff!
#15
Seems something's a miss with those scale readings -- Seems like the 7xx-8xx readings should be the front and the 5xx readings the rear -- but that doesn't match up with the markings on the readout face. Perhaps the scales were plugged into the wrong connectors? Getting rid of some weight up front would be nice. If the current lump has cast iron heads - you could be looking at dropping at least 125 lbs. off the front -- good stuff!
#20
Never would've imagined that, being a FWD car and all.