Putting an LQ4 in a Slowpar...
#1
Putting an LQ4 in a Slowpar...
...particularly a 69 Dart. Have an aftermarket front end for it. Have been talking to Denny, the builder of it about a problem. The rear sump pan. Part of Dennys front end is a cross brace that is a necessary evil. Needless to say the sump will be in the way. Denny will be fabbing up a set of LS mounts, he has a ton of inquiries about swapping an LS into Slowpars. He has told me that he is going to attempt to design another brace to get around the pan but...
Did a search on here about a center sump pan. Found 1 thread, not much info it...and it was 7 years old. Any ideas?
After posting this I read the first page of the oil pan sticky and found the link to the Sikky pan...if nothing else is available I will use that...
Did a search on here about a center sump pan. Found 1 thread, not much info it...and it was 7 years old. Any ideas?
After posting this I read the first page of the oil pan sticky and found the link to the Sikky pan...if nothing else is available I will use that...
Last edited by lsdart; 07-29-2017 at 09:35 AM.