Pinouts and wiring diagrams
#81
Lookin for some info
Hey guys, I know this is probably out there already. I am new to the forum and need some help. I am doin a 5.3 swap into a 92 chevy k1500 4x4. I am keepin the factory 5 speed in there and the 4x4. I am tryin to figure out the schematics of the wiring harnesses. It has a 03 wiring harness and I want to splice it into my factory harness using the existing gauges. If there is a write up out there I would sure appreciate it if you could send me in its direction. I have seen a video on youtube on it, but I am lookin for the diagrams, schematics, pinouts, etc. Here is the link to the vid.
#83
TECH Apprentice
Join Date: Aug 2010
Location: Melbourne, FL.
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
#89
Looking for the wiring diagram/pinouts for a 2002 Cadillac Escalade 6.0L. Is it the same as any of the other diagrams listed? I looked at Autozone's website and they don't have the wiring diagram for the ECM/PCM listed. What else would it be listed as? Thanks.
Jordan
Jordan
#92
Looking for pinout for 2012 Silverado L9H with 6L80E with E38 ECM
I have looked at pinouts for earlier trucks and they don't appear to match up, particularly pin 54 has a white wire where others claim pin 54 is unused. Some other colors aren't matching either.
I have looked at pinouts for earlier trucks and they don't appear to match up, particularly pin 54 has a white wire where others claim pin 54 is unused. Some other colors aren't matching either.
#98
Great thread, thanks... I am putting a 06 GTO/T56 LS2 in a 1968 Camaro.. Looking for the pin outs and also what do most folks actually delete from harness.
I will be using the DBW, electric fuel pump, electric fan .For now mechanical gauges but will be converting to factory electric gauges for the car including tach and speedo . NO AC, No pollution controls, only 2 O2s.
Thanks
BobH
I will be using the DBW, electric fuel pump, electric fan .For now mechanical gauges but will be converting to factory electric gauges for the car including tach and speedo . NO AC, No pollution controls, only 2 O2s.
Thanks
BobH
#99
TECH Resident
iTrader: (1)
Great thread, thanks... I am putting a 06 GTO/T56 LS2 in a 1968 Camaro.. Looking for the pin outs and also what do most folks actually delete from harness.
I will be using the DBW, electric fuel pump, electric fan .For now mechanical gauges but will be converting to factory electric gauges for the car including tach and speedo . NO AC, No pollution controls, only 2 O2s.
Thanks
BobH
I will be using the DBW, electric fuel pump, electric fan .For now mechanical gauges but will be converting to factory electric gauges for the car including tach and speedo . NO AC, No pollution controls, only 2 O2s.
Thanks
BobH
LS2 C1
LS2 C1/C2
LS2 C2/C3
GTO LS2 J1
More GTO LS2 Pinout Info
GTO LS2 Harness Connector ID
More harness connector ID
#100
Thank You,
BobH