ls1 Stand Alone Wiring Harness Diagram
02-16-2017, 02:57 PM
#41
Teching In
Join Date: Feb 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Stand alone harness hi I wish to have the pin out did Diagrams to now what wires to remove so I can connect my 1999 ls1 to my 1975 model Holden hj ute. And all info reguarding the 4L60e transmission. Cheers
02-16-2017, 04:48 PM
#43
Teching In
Join Date: Feb 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Wire harness so I just follow the Pin out diagram and what about the wires the say not used., once finished what wires should be left to connect the four wires I need to connect to my car. Cheers
02-16-2017, 07:45 PM
#44
Teching In
Join Date: Feb 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Wire harness so I just follow the Pin out diagram and what about the wires the say not used., once finished what wires should be left to connect the four wires I need to connect to my car. Cheers
02-17-2017, 03:19 PM
#45
Teching In
Join Date: Feb 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Hi but my ls1 is from Australia and the wires might be in different pins . Is there any diagrams matching my car. Also I need to know which wires that solder together at the end like the starter motor, alternator ignition and 12 volt to battery constant. Cheers
02-23-2017, 07:30 AM
#46
Registered User
Join Date: Feb 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Ls1 standalone diagram my email is glewis275@hotmail.com
02-23-2017, 10:20 AM
#47
Teching In
Join Date: Feb 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
would you be able to send me the schematics to make a harnes please i need to make one as im putting a ls1 in my 74 oldsmobile
my email is glewis275@hotmail.com
my email is glewis275@hotmail.com
I need to know all the wires I need to remove from the pcm and which wires are left for me to connect to my starter , alternantor temp and oil sensor. And battery , ignition and grounds.
I would really appreciate any info. Cheers regards Many
Get Outlook for iOS
04-25-2017, 04:47 PM
#48
Teching In
Join Date: Apr 2017
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Hello I'm interested in your pin out from the silverado i currently have a 1999 suburban with the 4l60E and a 5.7 vortech and plan on doing a 6.0 swap off of a 2500 silverado please and thank you if you could help
04-30-2017, 07:22 AM
#49
Registered User
Join Date: Apr 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
05-18-2017, 11:15 PM
#50
Registered User
Join Date: May 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
04-20-2018, 08:24 PM
#53
Hey I messed up and went ahead and pulled every wire from pcm connectors. Is there something that tells me which wires are terminated at connectors?
I have the pin outs from lt1swap.com. For instance Red connector pin 2 is brown TCC control solenoid..... Is that from the trans connector?
I have the pin outs from lt1swap.com. For instance Red connector pin 2 is brown TCC control solenoid..... Is that from the trans connector?
08-26-2019, 04:18 PM
#54
Registered User
Join Date: Aug 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
08-28-2019, 03:21 PM
#55
