dropcivic

Ok, its just stuff i run across. I mess with fords(302's and 351's) and hondas more then i mess with chevy's. This swap is for my girl so i am wandering into unknown area of mod motors here.

the_merv

iTrader: (88)

Sell the Honda's..scrap the Fords..and get with the fast ****..

These arent Mod Motors's BTW..

1961ba427

iTrader: (26)

I still just don't get why anyone builds Hondas. I'm not a Ford guy, but I wouldn't turn my nose up at a nice Mustang coupe (especially since I'd throw a BBC in it after the 302 gave up) but the whole import thing is just to me. Now I did have a friend with a really nice Supra awhile back....but it was rear wheel drive and an easy 11 second car on street tires and zero gutting. It didn't sound like a pissed off bumble bee either.

Novaman

This post makes me want another car I don't need haha. You can get 4th gen v6 cars blown motor for like $500. I prefer 93-95 anyway for the nose and emissions laws here.

Kratos

Can I use the PCM and harness out of 2000 Camaro ss to convert the LT1 into LS1 95 impala ss. Im trying to find out what I need to make this project work I have all accessories, both pcms, etc.. I need to know what to keep and will the camaro ss transmission go in with no problem its 4l60e with bigger valves and better servo from the one out of 1995 impala ss.( Merv anybody help me out).

the_merv

iTrader: (88)

Trans will work and so will the harness.

I kno it's an old post.. Still will help tho..

ROUDA

iTrader: (1)

this is a good read

the_merv

iTrader: (88)

Lots of good info here.

ROUDA

iTrader: (1)

Im going to start a ls swap in my 95 soon Merv if you dont mind and have time Ill have lots of qs for you maybe help me with the harness pinnout to ?

the_merv

iTrader: (88)

Let me know..

waxenate

iTrader: (5)

Rouda...I just did a 95 swap. Merv is the best on here but I might be able to help with some simple questions.

the_merv

iTrader: (88)

Haha..I'm not the best..I just build stuff on my own and somehow it works..

93Z2871805

iTrader: (5)

I see your original write up has changed a little, did you do anymore note taking when you did mine? Like a little more step-by-step?

the_merv

iTrader: (88)

Nothing to really take notes on...just put the right wires in the correct places..

I have been touching up the first post to make it easier to understand..

bcas

can i use a 96 b-body computer and tap ls1 harness into it? what the easiest way to do this?

bcas

so i will be removing my lt1 computer and un-needed engine wires and tapping in ls1 harness and only using ls1 computer? about to start my impala swap but trying to figure this out before i start..

the_merv

iTrader: (88)

Yup..LS PCM.

KMWELLZ

is the ground feed to fuel pump relay # 23 grey on the blue pcm?

the_merv

iTrader: (88)

Lt1swap.com..look for the PCM pinouts. I don't have my info infront of me..

KMWELLZ

thanks alot for making this thread its helped through out the build, found it listed as a sender ground. lets hope this thing runs???