Truck TB and MAF, on ls1 intake in fbody
#1
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2007
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Truck TB and MAF, on ls1 intake in fbody
Using the 5.3 truck TB and MAF on an ls1 intake in an fbody.
Is the truck TB 75, 80, or 85mm?
The MAF is 85mm correct?
Since these are not factory ls1 sizes, what type of tubing/hose would I use to connect all of this?
What kind/size lid should I go with?
How far away does the MAF go from the TB?
Sorry for all the questions, but im getting down the last little bit of my swap and need this stuff answered.
EDIT: All of this is on a 5.3l, not sure if it matters.
Is the truck TB 75, 80, or 85mm?
The MAF is 85mm correct?
Since these are not factory ls1 sizes, what type of tubing/hose would I use to connect all of this?
What kind/size lid should I go with?
How far away does the MAF go from the TB?
Sorry for all the questions, but im getting down the last little bit of my swap and need this stuff answered.
EDIT: All of this is on a 5.3l, not sure if it matters.
#5
9 Second Club/LS1TECH Sponsor
iTrader: (14)
The factory cable throttle bodies are all the same size (LS1 and truck).
__________________
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
91 Z28 LS2 408CI, LS9 Supercharger, LPE GT7 cam, Yank3000, 3450 raceweight.
Latest numbers: 9.71 ET, 141.42 MPH, 1.40 60' , 610 RWHP Mustang Dyno
www.speartech.com
#7
TECH Junkie
iTrader: (1)
Trending Topics
#10
#14