LS2 350z project begins...
#42
Here's a friend of yours
Good job man !
Real nice swap...
I'm swaping an LS6 into my Miata, here's the first time we putted in into.
http://www.bfamus.tv/watch.php?mdid=...Miata+LS6+swap
But what you really want to see is another V8 350Z swap. My friend Mathieu is swaping a 550 HP LQ9 with a 4speed manual trany for drifting..
http://www.canadiandrifting.com/Vide...Z-V8-Swap.aspx
Wish you real good luck man, GOOD CHOICE !
Real nice swap...
I'm swaping an LS6 into my Miata, here's the first time we putted in into.
http://www.bfamus.tv/watch.php?mdid=...Miata+LS6+swap
But what you really want to see is another V8 350Z swap. My friend Mathieu is swaping a 550 HP LQ9 with a 4speed manual trany for drifting..
http://www.canadiandrifting.com/Vide...Z-V8-Swap.aspx
Wish you real good luck man, GOOD CHOICE !
#45
You are not joking. Those Z guys on other forums are a bunch of baby's. I've posted that I will be swapping out my VQ35 for a LSX and they are like, you're a jack *** what the hell are you think.......... Talking smack like, these LSX engines suck and all sorts of ****. Well you know what they say ignorance is bliss.
#52
Thread Starter
10 Second Club
iTrader: (27)
Joined: Nov 2006
Posts: 1,905
Likes: 0
From: Connecticut
This weekend should be a good weekend as far as getting things together finally!:
(twin disc)
Slp balancer....its actually a REALLY nice piece..much nicer than I expected(cant really tell from the pics)
Nice rim/tire shot:
Engine is in..I think I have to take it out to get the driver side header in. It seems like I might have to put the header in first then the engine, then the bell housing then the transmission haha
(twin disc)
Slp balancer....its actually a REALLY nice piece..much nicer than I expected(cant really tell from the pics)
Nice rim/tire shot:
Engine is in..I think I have to take it out to get the driver side header in. It seems like I might have to put the header in first then the engine, then the bell housing then the transmission haha
#55
Snyper, I was wondering if you could post some pics of the the Hinson Kit? looking to start mine here soon. I am going to talk to the guys there at Hinson about building me a 2in header. I was considering going with a twin turbo system but I don't want to go with a STS type setup.To many things up in the air right now.
#60
Can you update with wiring info. What you kept wiring wise on the stock harness and what you changed??? how your going to get the guages to work etc.. As much info as possible. I am planning on doing the same swap soon. just gathering as much info before I start the swap..Thanks Eddie