DBW startup problem
#22
Launching!
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: Germany
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Update...Problem solved.
On the 2006 setup, apparently if the PCM detects no charging, then the pedal won't work. I hooked up the radiator, put the belt on and voila' the pedal started working just fine.
On the 2006 setup, apparently if the PCM detects no charging, then the pedal won't work. I hooked up the radiator, put the belt on and voila' the pedal started working just fine.
#23
Launching!
iTrader: (4)
Join Date: Nov 2005
Location: Las Vegas
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Verify you have the right TAC module and pedal for your PCM. Street & Performance has a listing of the TAC modules part #'s and their corresponding years. Or Speartech can probably tell you if you have the correct setup.
I had the same problem when I put my 5.3 in, and it was because I had the wrong TAC module and cable.
I had the same problem when I put my 5.3 in, and it was because I had the wrong TAC module and cable.
Is this the right S&P? http://www.hotrodlane.cc/
John Spears is going to build my wiring harness (when I get the $) but I'd like to get the correct parts first.
Thanks,
Mike R.