Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

VSS Question...

Thread Tools
 
Search this Thread
 
Old 05-18-2009 | 04:17 AM
  #1  
7071's Avatar
Thread Starter
Teching In
iTrader: (2)
 
Joined: Feb 2007
Posts: 20
Likes: 0
Default VSS Question...

Is VSS signal different between Corvette C5 and Camaro? Don't both use 40 tooth wheel for driveshaft revs, or is signal from C5 after rearend gears, so ratio should be further modified?

2002 corvette fly-by-wire LS1 bolted to 4L60E swap into chevelle.

PCM was flashed with 02 Corvette program, modded for rear end ratio (3.31) and tire size (26.7).

PCM reports car it doing 150+ MPH when only going about 20, so motor shuts down.
Old 05-18-2009 | 10:13 PM
  #2  
7071's Avatar
Thread Starter
Teching In
iTrader: (2)
 
Joined: Feb 2007
Posts: 20
Likes: 0
Default

anybody?
Old 05-19-2009 | 05:30 AM
  #3  
rsz288's Avatar
TECH Resident
15 Year Member
 
Joined: Apr 2008
Posts: 794
Likes: 4
From: Right here, right now!
Default

Originally Posted by 7071
Is VSS signal different between Corvette C5 and Camaro? Don't both use 40 tooth wheel for driveshaft revs, or is signal from C5 after rearend gears, so ratio should be further modified?

2002 corvette fly-by-wire LS1 bolted to 4L60E swap into chevelle.

PCM was flashed with 02 Corvette program, modded for rear end ratio (3.31) and tire size (26.7).

PCM reports car it doing 150+ MPH when only going about 20, so motor shuts down.
If C5 is like C6 and my memory is up to scratch, the reluctor is on the ring gear in the diff/transaxle.



Quick Reply: VSS Question...



All times are GMT -5. The time now is 12:06 PM.