s10's using BRP/Muscle Rod headers?
#1
Teching In
Thread Starter
Join Date: Mar 2009
Location: dyersburg, tn
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
s10's using BRP/Muscle Rod headers?
Anyone using the BRP/Muscle Rod headers out there? I'm interested in the full length headers, but using the Current Performance engine mounts. Anyone use the headers with someone else's mounts?
Don't want to pay for another set of mounts.
Don't want to pay for another set of mounts.
#3
Teching In
Join Date: Feb 2009
Location: Annapolis, MD
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Me
I have them on mine 1.75", had troubles with one tube that goes around the frame. Still not sure if it was the headers or the frame that was the problem they fit very nice outside of that. No performance results yet I haven't got it finished and out to the track yet. BTW installed engine and headers with the front end off. I don't know how much that will affect your install.
#4
Teching In
iTrader: (1)
Join Date: Oct 2009
Location: Acworth, Ga
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I have a set of their mid-length headers on my truck. They fit ok, had to trim lip off firewall and a bit off upper a-arm on passsenger side. Driver side fit better but not much clearance, if any, that goes around steering shaft.
#6
Teching In
Thread Starter
Join Date: Mar 2009
Location: dyersburg, tn
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I have them on mine 1.75", had troubles with one tube that goes around the frame. Still not sure if it was the headers or the frame that was the problem they fit very nice outside of that. No performance results yet I haven't got it finished and out to the track yet. BTW installed engine and headers with the front end off. I don't know how much that will affect your install.
Trending Topics
#8
TECH Resident
iTrader: (28)
I will be using their Mid-Lengths and thier mounts...Another member that used thier mounts and mids had some clearance issues...but that was with the older mounts and pipes....There are some guys over on S10Forum that have used the LTs with no issues and different mounts...
#9
On The Tree
iTrader: (6)
Join Date: Feb 2007
Location: Irwin, PA
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
I'm using there 1 7/8" with Car Shop solid mounts..I'll get pics and post of them as soon as i can for u guys
my Boss has a LS7 1998 blazer with there 1 7/8" stepped to 2" LT's with BRP mounts
my Boss has a LS7 1998 blazer with there 1 7/8" stepped to 2" LT's with BRP mounts
#10
i need some help with something i am doing a 88 s10 for customer i have done carborated one with a holly bule pump but doing efi one and need to no what the cheaps way to go with fule system herd a few ideas but not sold on it yet
#11
TECH Resident
iTrader: (28)
The fuel system is easy and straight forward...check out S10forum.com
Here's a link to the LSx Section read the stickes LSx conversion info and Parts and Info Swap List
http://www.s10forum.com/forum/lsx-discussion/
#13
thanks i like your set up it is pretty funny becouse i ran that same set up with a 408 six speed f body l92 cnc ported heads by texas speed with a little extra work cam a little different it was 238/242 113 lsa l92 ported intake 90m nick 11.8 compresson 1 7/8 headers it made 551 rear i think that you need some brp headers at least 1 3/4 if it is in your buget
#14
TECH Resident
iTrader: (28)
Current Performance Wiring stopped making their 1 7/8 Longtubes ( they fit completely inside the framerails and were coated ) or else I would've gotten those...The 1 5/8s shouldn't be a big restriction from the 1 3/4s
Here's a pic..
http://rides.webshots.com/photo/2358...60344825gFvwvJ
Here's a pic..
http://rides.webshots.com/photo/2358...60344825gFvwvJ
#15
On The Tree
iTrader: (1)
I just attempted to install the brp's 1 7/8 in my 82 with the carshop inc's mounts and no go not even close the back tube passenger side hits the frame like the flanges aren't in the right position and same on the 3rd tube back on the driver's side and the 2nd tube back driver's side hits the frame before the head. any ideas? I talked with the guys at brp's but they don't sound to knowlegable about there own product. Really dissapointed I think I need to contact visa and look for another company for a set of long tubes any one else make long tubes for a S10 LS swap?
#16
TECH Resident
iTrader: (28)
RetroLSX sponsor on here just started producing Current Performance's 1 3/4 longtubes in Stainless and they're supposed to be for under $600!!!! I'll find the link...
Post #118 https://ls1tech.com/forums/conversio...ings-ls-6.html
Post #118 https://ls1tech.com/forums/conversio...ings-ls-6.html
#17
TECH Apprentice
Join Date: Oct 2005
Location: florida
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
I just attempted to install the brp's 1 7/8 in my 82 with the carshop inc's mounts and no go not even close the back tube passenger side hits the frame like the flanges aren't in the right position and same on the 3rd tube back on the driver's side and the 2nd tube back driver's side hits the frame before the head. any ideas? I talked with the guys at brp's but they don't sound to knowlegable about there own product. Really dissapointed I think I need to contact visa and look for another company for a set of long tubes any one else make long tubes for a S10 LS swap?
Hopefully the ones that are fixing to come out fit like they are suppose to, or I'll just use camaro manifolds and call it a day!
I'm not after every last hp out of my swap..