LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Conversions & Swaps
Transmission to engine bolt sizes?

Conversions & Swaps LSX Engines in Non-LSX Vehicles

Sponsored by:

Transmission to engine bolt sizes?

Reply Subscribe

Search this Thread

Old

Nov 5, 2009 | 12:56 PM

#1

Thread Starter

Launching!

iTrader: (2)

Joined: Oct 2009

Posts: 219

Likes: 3

Default

Transmission to engine bolt sizes?

I don't have the engine here yet but I want to get the bolts needed to mount the engine to an engine stand. It is a 2007 5.3 truck engine. I did search and found the list with bolts but couldn't find any that said bellhousing?

How deep are those bolt holes in the engine?

Thanks
Mark

Old

Nov 5, 2009 | 05:48 PM

#2

TECH Senior Member

Joined: Jul 2009

Posts: 8,032

Likes: 661

Default

I believe they are 10MMx1.5MM and something like 40MM long. I'd double check the length though. I just bought a few and don't recall the length. I hope this helps SOME.

Old

Nov 5, 2009 | 05:50 PM

#3

Thread Starter

Launching!

iTrader: (2)

Joined: Oct 2009

Posts: 219

Likes: 3

Default

I will have to get longer anyway because of the engine stand but the thread size is what I needed. I don't want to get too long and bottom them out in the block does anyone know how deep the holes/thread is?

Thank you

Old

Nov 5, 2009 | 11:07 PM

#4

Launching!

iTrader: (13)

Joined: Feb 2008

Posts: 266

Likes: 0

From: Riverside, Ca

Default

M10x1.5x35 and M10x1.5x40
couldn't tell you how many of each

Old

Nov 5, 2009 | 11:52 PM

#5

TECH Resident

iTrader: (30)

Joined: Nov 2007

Posts: 823

Likes: 0

From: Van Nuys

Default

if this helps

https://ls1tech.com/forums/conversio...s-lengths.html

Old

Nov 6, 2009 | 12:03 AM

#6

TECH Resident

iTrader: (28)

Joined: Oct 2008

Posts: 895

Likes: 1

From: USA

Default

If they are too long just buy some washers to space them out...

Old

Nov 6, 2009 | 04:32 PM

#7

TECH Addict

iTrader: (22)

Joined: Apr 2009

Posts: 2,656

Likes: 149

From: NC

Default

Get long ones and grind the length down

Trending Topics

Disappointing Dyno Results

27

483
So GM / ACD is no longer an option for Oil Pressure Sending Units?

14

339
Oil Bypass Barbell

20

493
Help between two cams

8

250
Radiator Fitment

5

165

Old

Nov 6, 2009 | 05:20 PM

#8

Thread Starter

Launching!

iTrader: (2)

Joined: Oct 2009

Posts: 219

Likes: 3

Default

thanks everyone

LS1 Tech Stories

The Best V8 Stories One Small Block at Time

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Verdad Gallardo

10 Camaros You Should Never Buy

10 LS Engine Myths That Refuse to Die

Verdad Gallardo

Reply Subscribe

200r4, 53, bbc, bolt, bolts, engine, ls1, ls2, lsx, mount, size, sizes, stand, thread, transmission

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 04:59 PM.