Chevy II Nova Ls1 Header
#1
Chevy II Nova Ls1 Header
For those looking for Ls1 Headers with the heidts front Shoenfeld Headers will work perfect,I just brought a set prt#186Ls1-3.I paid $268 delivered to my door today.Look at my album for pictures.The Headers are $249.95 1 3/4 Long tube.I'm trying to help everybody so that you don't have to spend all that damn money for a good header.
https://ls1tech.com/forums/album.php?albumid=12972
https://ls1tech.com/forums/album.php?albumid=12972
Last edited by pimpdulla; 09-19-2011 at 09:05 AM.
#6
The adapter plate are from Trans dapt #4572,and the motor mounts are the short/wide sbc mounts for First generation sbc,from looking at the pictures the headers don't hang low(perfect,side by side to the trans pan),the lowest thing under the car is the oil pan(LQ9 truck pan).Slaming shouldn't be a problem far as headers are concern.
Trending Topics
#13
Well all I can do is tell you what happen to me,I call them,Asked for this prt#186ls1-3 they asked me if I had a account,I said no, I just want to buy a set of headers and they sold them to me.I don't think it get much simpler than that,Hey it work out fine for me.
Last edited by pimpdulla; 01-08-2012 at 09:02 PM.
#15
Well on my 67 nova with the heidts front clip they clear everything like you would want them to 100%.Now for the TCI front clip I would think so but not 100% sure,I've been told that the TCI frame rails are narrow so I don't know if that is on the inside or the outside of the engine bay.If it was mind I would try it because,if the frame rails are narrow I would think that might give me even more clearance so I would try them.
#19
Staging Lane
Join Date: Oct 2007
Location: Mill Creek/Lynnwood, WA
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Do you have any pictures of the trans mount? Looks like you are using the stock mount. Did you relocate it back, modify it or use something different?
Did anyone find out if these will work with the TCI clip? TCI clip is narrower at the firewall than the other clips.
Did anyone find out if these will work with the TCI clip? TCI clip is narrower at the firewall than the other clips.
#20
Are we going to flip to see which one of us orders a set to see if they fit the TCI clip?
Also, im still not seeing how you get the plug wires on without running them over then under the header tubes on some cylinders which I wouldnt want to do.