LS1/Vortec pcm's and harnesses - what can be used together?
02-28-2010, 07:36 PM
#22
Good progress. With all the wires labeled with their assigned pin, installing them into the connectors will take very little time. Be sure to double check the circuits with a multimeter before looming
Any reason you've got the intake on backwards? Whats this going into?
Any reason you've got the intake on backwards? Whats this going into?
02-28-2010, 09:44 PM
#23
Staging Lane
Thread Starter
iTrader: (4)
Join Date: Oct 2009
Location: Cleveland, Ohio 44011
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Pocket, will be sure to double check for continuity. Whats the best way to bring all the pink ign wires and grounds together? Terminal strip? Big nasty soldered mess?
Intake is turned 180 deg to clear the engine cover and get more room up front, for less wiring going across the motor, and to bring the air intake essentially into the cockpit. This will be going into my spartan v8 roadster, see below =)
Intake is turned 180 deg to clear the engine cover and get more room up front, for less wiring going across the motor, and to bring the air intake essentially into the cockpit. This will be going into my spartan v8 roadster, see below =)
