Can someone point me in the direction of were to get universal plug wires
#1
TECH Regular
Thread Starter
iTrader: (8)
Join Date: Apr 2009
Location: Mount Bethel PA
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Can someone point me in the direction of were to get universal plug wires
my setup is unique and i need some angle boots and some straights i am wondering if some on has a link for a kit that has a build your own plug wire set like the old SBC ones but with the coil pack ends?
#2
TECH Junkie
iTrader: (18)
Go to Summit and order these ends, http://www.summitracing.com/parts/MSD-3304/ and whatever wires you want to put them on.
#3
I have this set
http://www.summitracing.com/parts/MSD-32829/
They are a little longer than the stockers and very good quality. The good part is the plug boot can be bent anywhere from straight to a 90° bend. Once youi bend them they hold their bend, so you won't have anytrouble customizing each plug.
http://www.summitracing.com/parts/MSD-32829/
They are a little longer than the stockers and very good quality. The good part is the plug boot can be bent anywhere from straight to a 90° bend. Once youi bend them they hold their bend, so you won't have anytrouble customizing each plug.
#4
plug wires
i got my set from baker engineering 616-837-8975.they are scott wires you tell them what length and what ends you want.all the wires are numbered at the boot very high quality and there already made for you no hassle.took three days to get mine and $125.
#5
On The Tree
iTrader: (13)
Join Date: Dec 2005
Location: Northen California
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
I use the MSD set for the LT1. The connectors for the Optispark distributor fit the LS1 coils. From there you can use whatever plug connector you need on the other end, although some come with the kit. These are long enough to mount remote coils. I suggest you buy a set of the MSD crimpers if you don't already have them and some dilectric grease. Have fun.
#6
TECH Fanatic
iTrader: (18)
Join Date: Sep 2006
Location: Nor Cal
Posts: 1,002
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/member.php?u=34219
he makes wires custom order. great prices too!!! You can get 1 to 1000 wires from him.
he makes wires custom order. great prices too!!! You can get 1 to 1000 wires from him.
Trending Topics
#9
TECH Fanatic
iTrader: (18)
I use the MSD set for the LT1. The connectors for the Optispark distributor fit the LS1 coils. From there you can use whatever plug connector you need on the other end, although some come with the kit. These are long enough to mount remote coils. I suggest you buy a set of the MSD crimpers if you don't already have them and some dilectric grease. Have fun.
thanks