1976CamaroGuy

iTrader: (8)

Like this?

http://paceperformance.com/index.asp...&ProdID=248707

It looks like an awesome deal considering it comes with a new alternator and PS pump.



It says the "kit" uses 1997-2004 corvette components, but that looks like a F-body set up. Anyone care to visually confirm this for me?

I need the Fbody bracket sets, and if this isn't it could someone point me in the right direction?

Thanks!

Phoenix 5.7

iTrader: (7)

water pump and PS look like vette offset to me. notice how short the pulley is on the water pump.

1976CamaroGuy

iTrader: (8)

Yeah I noticed that, I guess I was looking at the positions of the alternator and power steering....most of the vette systems had the alternator up high.

Bowtie70SS

iTrader: (10)

That appears to be the Cadillac CTS-v setup. I took that off my engine and got the Vette system. I bought some parts new and others used and got it done for under $300.

dfolse62

Camero guy, I just bought f body accessorie brackets on e bay. Reasonable price, GM and new! Try to contact Ron at racing@katechengines.com Darrel

1976CamaroGuy

iTrader: (8)

Thanks, that's what I'm going to do is buy the stuff when I can catch someone selling it used, to try and keep my costs down.

The only bad thing is that people are selling used power steering pumps from the F-body's in the $150 range, which I have a hard time swallowing. But I guess if you need it, you need it. I think this will be my biggest expense.

Keeping my eyes peeled for good deals

1976CamaroGuy

iTrader: (8)

I'll shoot them an email, thanks again

Dennis

130fe

iTrader: (14)

You have PM.

Speartech

iTrader: (14)

Yes, the 19155166 number is the CTS-V kit (similar to F-body in layout, but spaced differently from the block).

The Corvette accessory kit is 19155167.

Both of those are WITHOUT the A/C compressor and related parts.

If you need the A/C stuff, the numbers change to 19155066 and 19155067 respectively.

1976CamaroGuy

iTrader: (8)

PM replied

Thanks

forcd ind

iTrader: (7)

i orig tried to get the Vette kit, but the part # for the whole thing was never avail., so i had to buy it piece part, so i wonder if any of the kits are avail yet
wasnt cheap, but discounted wasnt to bad, and its all new-the alt. had some kind of sprag type setup on it, one way pulley, kind of hard to fig it out to rem it, but i got it off (went to an 8 rib procharger setup)
the kit shown looks like a good fit in some car bodys

Speartech

iTrader: (14)

The kits are available. I just got a Vette one within the last 2 weeks.

Blue67LS2

iTrader: (2)

I bought the vette kit recently from them as well. In my opinion its a great deal and came with all brackets, every bolt pre-packaged. and numbered which made for as easy istall. It also inclded detailed instructions which were helpful as well.

jfg455

iTrader: (5)

the PN's on there GM #'s? They dont seem to cross to anything in my catalog.

Speartech

iTrader: (14)

The part numbers with the "0" in them are valid GM numbers.

I think Pace did their own thing on the kits without A/C by changing the "0" to a "1" in the part number. I don't think those two are valid GM numbers.

Jimbo1367

I too just got a Vette setup minus AC pyump from PACE recently. SD-parts told me GM wasn't selling them without ac anymore. I am glad I didn't take his word for it. LOL BTW... under $500.00 too

hifi875

iTrader: (2)

ive got the vette system minus ac on my 69 camaro. i got a sd7 compressor and brackets to complete the a/c. looks good and works good

130fe

iTrader: (14)

Hifi, which brackets use the SD7? Any pictures?

71 chevelle

iTrader: (13)

Hey bowtie do you still have the ctsv set up. I have the truck set up and need to change as well. If you still have it and willing to sell send me a pm or if anyone has a front drive let me know.

jfg455

iTrader: (5)

yup the ones with a "0" are a good GM number. My cost at the dealer is $748 and they are selling them at $769 so it looks like a good deal. I cant find the ones without A/C anywhere in the GM catalog.