rubber 3/8 fuel inj hose with stock fittings?
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Oct 2009
Location: socal
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Has anyone done this? I know its kinda ghetto but I'm low on funds and wanna get this car on the road.
I took the hard plastic hose off the quick disconnect fitting at the rail and it looks like a 3/8 hose will fit
Over it pretty tight. Add a fuel injection hose clamp and it seems it would hold psi pretty good. What
Are your guys thoughts ondoing it this way?
I took the hard plastic hose off the quick disconnect fitting at the rail and it looks like a 3/8 hose will fit
Over it pretty tight. Add a fuel injection hose clamp and it seems it would hold psi pretty good. What
Are your guys thoughts ondoing it this way?
#5
TECH Veteran
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I don't think I would call it "ghetto" as much as "low buck", I have a swap with over 125,000 miles on it and almost 10 years, and I used the factory GM plastic quick connectors. I mean if they're good enough for every GM car made in the last 15 or 20 years, why wouldn't they be good enough for a swap? But like was said before, just be sure to use a good fuel injection hose and fuel injection hose clamps and you'll be fine.
#6
Launching!
iTrader: (2)
Join Date: Jan 2010
Location: Demotte , IN
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I don't think I would call it "ghetto" as much as "low buck", I have a swap with over 125,000 miles on it and almost 10 years, and I used the factory GM plastic quick connectors. I mean if they're good enough for every GM car made in the last 15 or 20 years, why wouldn't they be good enough for a swap? But like was said before, just be sure to use a good fuel injection hose and fuel injection hose clamps and you'll be fine.
I don't like the idea of hose clamps except maybe on a return.
Trending Topics
#10
TECH Senior Member
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
As long as the hose and clamps are FI rated, you should have any problems. I would just make sure that the tube you are connecting the hose to has some type of barb or flare on it to assist with the clamping and securing of the hose..
Like LS1Nova71 said.. there are millions of cars on the road with just FI Rated hose and clamps.. you don't have to have the Rich and Fancy aftermarket and High Performance equipement (AN/SS Braided hose,etc) to get realiable setups.
One other tip. I braze or weld AN bunts to the Hard lines. it is Cheaper and more secure that any Quick Disconnect (aftermarket or OEM). How offen do you really remove the line ??
Like LS1Nova71 said.. there are millions of cars on the road with just FI Rated hose and clamps.. you don't have to have the Rich and Fancy aftermarket and High Performance equipement (AN/SS Braided hose,etc) to get realiable setups.
One other tip. I braze or weld AN bunts to the Hard lines. it is Cheaper and more secure that any Quick Disconnect (aftermarket or OEM). How offen do you really remove the line ??