LS3/4L70E into C4 Corvette
Very nice!!
I Just started a swap on my 91. I found your solution to the transmission problem very helpful. I hope you don't mind if I contact you for help with the wiring when the time comes.
Forgot to update this thread...
Here it is at the dyno... It was dynoed on a Dyno Dynamics dyno. The tuner said that it might have some more in it, but we will have to dyno it in second gear due to the 2.59 rear maxing out the dyno speed.
http://www.youtube.com/watch?v=WYfYj...layer_embedded
Took the car down to the 1/8th a few weeks ago...This was my first time to the track in a while.
The conditions were 62.1 F 65 % Humidity 30.04 in Pressure
DA 689 feet above sea level.
My top three runs of the night were:
1. This was my final pass of the night. It was against a surprised C5 driver. He did a 8.216 @ 84.92
60' 1.864
1/8 7.927
MPH 91.09
2. Against C6 Z06. He did a 7.738 @ 98.78
60' 1.861
1/8 7.929
MPH 92.46
3. Against another C5 but he missed 2nd gear. 10.603 @ 45.60 for him.
60' 1.898
1/8 7.973
MPH 92.53
I need to purchase some tires now...
Next up is installing an A/C system on it... I'm still exploring my options but am looking to finish it up quick so I can take the car into paint in a few weeks.
Here it is at the dyno... It was dynoed on a Dyno Dynamics dyno. The tuner said that it might have some more in it, but we will have to dyno it in second gear due to the 2.59 rear maxing out the dyno speed.
http://www.youtube.com/watch?v=WYfYj...layer_embedded
Took the car down to the 1/8th a few weeks ago...This was my first time to the track in a while.
The conditions were 62.1 F 65 % Humidity 30.04 in Pressure
DA 689 feet above sea level.
My top three runs of the night were:
1. This was my final pass of the night. It was against a surprised C5 driver. He did a 8.216 @ 84.92
60' 1.864
1/8 7.927
MPH 91.09
2. Against C6 Z06. He did a 7.738 @ 98.78
60' 1.861
1/8 7.929
MPH 92.46
3. Against another C5 but he missed 2nd gear. 10.603 @ 45.60 for him.
60' 1.898
1/8 7.973
MPH 92.53
I need to purchase some tires now...
Next up is installing an A/C system on it... I'm still exploring my options but am looking to finish it up quick so I can take the car into paint in a few weeks.
Registered User
Joined: Jan 2013
Posts: 20
Likes: 0
From: MI
4L70E to 700R4 tailshaft alignment Thanks.
