LS6 Intake - vacuum line routing help!
I have the large (PCV) opening on the rear DS valve cover.
A vent nipple on the PS valve cover.
2 nipples on the bottom of the TB. (one on each side)
And a nipple on each side of the intake just behind the TB.
What goes and what stays?
Can take some pics if needed.
I have the large (PCV) opening on the rear DS valve cover.
A vent nipple on the PS valve cover.
2 nipples on the bottom of the TB. (one on each side)
And a nipple on each side of the intake just behind the TB.
What goes and what stays?
Can take some pics if needed.
The ones under the throttle body are for coolant to pass throught, that is usually connected from the front coolant line on the drivers side under the intake, goes through the throttle body, and am not sure where it goes after that (mine was disconnected).
The vent nipple on the ps valve cover (if it is toward the front) goes up to a port on the tb that on mine was facing rear-ward. I think this is part of the pcv system?
Last edited by billsnogo; Mar 5, 2010 at 07:52 PM.
Trending Topics
The Best V8 Stories One Small Block at Time



