Time to let you guys in on a secret. "My lexus is a transvestite"
#44
On The Tree
Thread Starter
iTrader: (6)
Join Date: May 2007
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
We made it to houston and back without any problems. The swap now has 1200 miles on it and about 5 1/4 mile passes. My thrid pass of the day I managed a 12.7 @109 with a 1.64 60 ft on nitto Nt05 STEET tires not the drag radials.
I must say I'm very impressed with this setup and I cant wait to finish it 100% to plan.
I must say I'm very impressed with this setup and I cant wait to finish it 100% to plan.
#48
On The Tree
Thread Starter
iTrader: (6)
Join Date: May 2007
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Here is a vid of the 12.7 run
http://www.youtube.com/watch?v=pEih2rVMmVs
#51
On The Tree
Thread Starter
iTrader: (6)
Join Date: May 2007
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
I built the Mr2 before Houston last year. I built everything myself including the 2.2l forged stroker. That was easy since I build 20-30 Mr2 stroker motors a year .
It had Wiseco pistons and pauter rods with a fully built and ported head (by me). The cams were a Japan only high lift 10mm version but they were not too crazy either 264 duration.
Turbo is a billet 6262 flowing through a custom stailness sch40 manifold. I used a trunk mounted greddy TTsupra intercooler. Twin walbro pumps and 1100cc injector dynamic injectors.
When I tuned it at 33psi on Q-16 it made 715hp and 525tq. It was popping on the dyno but I just figured I was lossing spark. It turned out a bucket was being smashed (due to the closed spring height being set wrong by the maching shop) causing coil bind and a few days later on a cold start the bucket got stuck down and a valve got smashed. Motor had 5000 miles. So I rebuilt it and sold it to make the ls1 Is300 dream come true.
Matt
It had Wiseco pistons and pauter rods with a fully built and ported head (by me). The cams were a Japan only high lift 10mm version but they were not too crazy either 264 duration.
Turbo is a billet 6262 flowing through a custom stailness sch40 manifold. I used a trunk mounted greddy TTsupra intercooler. Twin walbro pumps and 1100cc injector dynamic injectors.
When I tuned it at 33psi on Q-16 it made 715hp and 525tq. It was popping on the dyno but I just figured I was lossing spark. It turned out a bucket was being smashed (due to the closed spring height being set wrong by the maching shop) causing coil bind and a few days later on a cold start the bucket got stuck down and a valve got smashed. Motor had 5000 miles. So I rebuilt it and sold it to make the ls1 Is300 dream come true.
Matt
#52
TECH Enthusiast
iTrader: (54)
Join Date: Jul 2007
Location: Memphis, TN
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
I love this build, this has been my dream for a bit but everyone in the Lexus/Toyota world always said I was crazy since the 2JZ motor is already pretty good and a Supra swap is so much easier. Screw them, this is waaaay more awesome. You let me know if you ever consider selling this thing cause I want first dibs on getting my hands on it.
#54
TECH Apprentice
iTrader: (8)
Join Date: Jan 2004
Location: McKinney, TX.
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
I built the Mr2 before Houston last year. I built everything myself including the 2.2l forged stroker. That was easy since I build 20-30 Mr2 stroker motors a year .
It had Wiseco pistons and pauter rods with a fully built and ported head (by me). The cams were a Japan only high lift 10mm version but they were not too crazy either 264 duration.
Turbo is a billet 6262 flowing through a custom stailness sch40 manifold. I used a trunk mounted greddy TTsupra intercooler. Twin walbro pumps and 1100cc injector dynamic injectors.
When I tuned it at 33psi on Q-16 it made 715hp and 525tq. It was popping on the dyno but I just figured I was lossing spark. It turned out a bucket was being smashed (due to the closed spring height being set wrong by the maching shop) causing coil bind and a few days later on a cold start the bucket got stuck down and a valve got smashed. Motor had 5000 miles. So I rebuilt it and sold it to make the ls1 Is300 dream come true.
Matt
It had Wiseco pistons and pauter rods with a fully built and ported head (by me). The cams were a Japan only high lift 10mm version but they were not too crazy either 264 duration.
Turbo is a billet 6262 flowing through a custom stailness sch40 manifold. I used a trunk mounted greddy TTsupra intercooler. Twin walbro pumps and 1100cc injector dynamic injectors.
When I tuned it at 33psi on Q-16 it made 715hp and 525tq. It was popping on the dyno but I just figured I was lossing spark. It turned out a bucket was being smashed (due to the closed spring height being set wrong by the maching shop) causing coil bind and a few days later on a cold start the bucket got stuck down and a valve got smashed. Motor had 5000 miles. So I rebuilt it and sold it to make the ls1 Is300 dream come true.
Matt
#55
On The Tree
Thread Starter
iTrader: (6)
Join Date: May 2007
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
I worked at ATS Racing for over 5 years and still currently do contract labor for them. I have a miller sycrowave 250 and numerous other fab tools.
I'm working full time and moving but A/C is in the works. Lucky for me the weather is nice right now
Matt
I'm working full time and moving but A/C is in the works. Lucky for me the weather is nice right now
Matt
Last edited by ATSMATT; 04-22-2010 at 02:28 PM.
#59
TECH Fanatic
iTrader: (5)
Funny, buddy and I wanted more info on this car when we saw the video of it running at the TX2k and than I get an email from LSXtv
Very nice work, the quality of build you've done, I'm positive you could have picked up a sponsor or two along the way.
We are waiting for forced induction in 30 days part 2! lol
Very nice work, the quality of build you've done, I'm positive you could have picked up a sponsor or two along the way.
We are waiting for forced induction in 30 days part 2! lol